High rate deposition of a-Si:H and a-SiNx:H by VHF PECVD

✍ Scribed by T Takagi; K Takechi; Y Nakagawa; Y Watabe; S Nishida

• Publisher: Elsevier Science
• Year: 1998
• Tongue: English
• Weight: 322 KB
• Volume: 51
• Category: Article
• ISSN: 0042-207X
• DOI: 10.1016/s0042-207x(98)00284-x

✦ Synopsis

Very High Frequency (VHF) plasma enhanced chemical vapour deposition (PECVD) has been applied to hydrogenated amorphous silicon (a-Si:H) and hydrogenated amorphous silicon nitride (a-SiN x :H) films for thin film transistors (TFTs) fabrication. The effect of the excitation frequency on the deposition rate and the film quality of both films has been investigated. The films were prepared by VHF (30 MHzH 50 MHz) and HF (13.56 MHz) plasma enhanced CVD. High deposition rates were achieved in the low pressure region for both a-Si:H and a-SiN x :H depositions by the use of VHF plasma. The maximum deposition rates were 180 nm/min for a-Si:H at 50 MHz and 340 nm/min for a-SiN x :H at 40 MHz. For a-SiN x :H films deposited in VHF plasma, the optical bandgap, the hydrogen content and the [Si^H]/ [N^H] ratio remain almost constant regardless of an increase in deposition rate. The increase of film stress could be limited to a lower value even at a high deposition rate. The TFTs fabricated with VHF PECVD a-Si:H and a-SiN x :H films showed applicable field effect mobility. It is concluded that VHF plasma is useful for high rate deposition of a-Si:H and a-SiN x :H films for TFT LCD application.