## Abstract In this paper, microstrip‐line‐fed rectangular microstrip antenna with open‐end meandering slots in the ground plane for compact broadband operation is presented. The proposed design consists of a rectangular patch which is fed by a 50‐Ω center fed microstrip‐line feed. Three identical
Microstrip-fed bow-tie-shaped meander slot antenna with compact and broadband characteristics
✍ Scribed by Sang-Hyuk Wi; Jung-Min Kim; Jong-Gwan Yook
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 129 KB
- Volume
- 45
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
A no¨el compact circular polarization CP design of a single-feed equilateral-triangular microstrip antenna with a Y-shaped slot is presented. The Y-shaped slot is cut in the patch with its upper two arms facing either the triangle tip or the bottom side of the triangular patch. Results show that, wi
Figure 6 Cutoff frequency f and maximum frequency f as T max a function of drain source bias of 1.25 = 90 m 2 double-heterojunction PHEMT device In summary, we have presented the design and performance of double-heterojunction PHEMTs for linear power applications. The dc and RF results indicate tha
## Abstract In this letter, we experimentally study a T and a shunt‐stub‐shaped microstrip‐fed slot antenna backed by a ground plane. The proposed antenna has a frequency bandwidth of approximately 54% for __S__~11~≤−10 dB, centered around 2.5 GHz, with relatively good pattern characteristics. © 20
## Abstract A planar‐fed circular‐polarised (CP) microstrip patch antenna is presented and discussed. It is demonstrated that embedding four right‐angle triangular slots in a nearly square patch antenna and exciting with an offset inset feed, size reduction of up to 43% can be achieved while still