FDTD analysis of a compact microstrip antenna with a C-shaped slot
β Scribed by Jun-Hai Cui; Shun-Shi Zhong; Chun Yu
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 204 KB
- Volume
- 28
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The input impedance of a superstrate-loaded slot antenna with a perpendicular feed is studied using the FDTD method. Measurement was carried out to ¨erify the theory. The effects of the slot and superstrate on the input impedance are in¨estigated.
Dual-frequency operation of a single-feed circular microstrip antenna with a pair of arc-shaped slots is demonstrated. Typical designs of the proposed antenna with the frequency ratio of the two operating frequencies ranging from 1.38 to 1.58 are implemented and studied. The frequency ratio can easi
No¨el design of a dual-frequency triangular microstrip antenna with a V-shaped slot is proposed and experimentally studied. By selecting suitable dimensions of the V-shaped slot, dual-frequency operation with the frequency ratio ranging from 1.488 to 1.834 has been obtained using a single probe feed
Figure 10 Electric field, -polarized, backscattered from a sinusoidally deformed DCR with p s 0.1. Dashed line: h s 0; solid line: h s 0.2 tive or destructive way, thus justifying the oscillations present in Figure 10. As a final observation, we note that, by increasing the DCR dimensions, the lobe
A circularly polarized antenna, realized in a low-cost technology with an integrated feed, is presented for the land-mobile satellite seruice. This antenna presents large bandwidth, high gain, and good axial ratio in all frequency ranges.