## Abstract A 1.2‐V fully integrated 0.35‐μm inductively degenerated common source CMOS low‐noise amplifier has been demonstrated at 2.4 GHz in this paper. A simple common source configuration can be operated at lower voltage and has lower output impedance when compared with a conventional high out
Integrated low-noise amplifiers in CMOS technology
✍ Scribed by Willy Sansen
- Publisher
- Elsevier Science
- Year
- 1987
- Tongue
- English
- Weight
- 589 KB
- Volume
- 253
- Category
- Article
- ISSN
- 0168-9002
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract This paper presents a fully integrated concurrent dual‐band CMOS low‐noise amplifier (LNA). The LNA is implemented in a standard 0.18‐μm 6M1P CMOS process and is designed from the system viewpoint to provide higher gain at the higher band, for the first time, to compensate the higher‐ba
## Abstract In this article, a 5.8 GHz ISM‐band CMOS low noise amplifier (LNA) operating in a subthreshold region is presented. A conventional source degeneration inductor is eliminated for higher signal gain while providing reasonable input impedance. The LNA is fabricated using 130 nm CMOS techno
## Abstract A Q‐band low‐noise amplifier (LNA) suitable for low‐voltage operation is presented in this paper.The amplifier uses a low‐voltage cascode structure in the first stage of the amplifier and was fabricated using a 0.13‐μm RF CMOS process with eight layers of copper metallization. Low‐volta
## Abstract In this article, a 0.5 V X‐band low noise amplifier (LNA) composed of two common‐source stages is designed and fabricated with 0.18 um CMOS technology.Based on the structure of cascaded common‐source stages and forward body bias technology, the supply voltage is reduced. Measurement res