## Abstract In this article, a band‐switchable low noise amplifier using switching inductors is designed and measured. A voltage supply is fed through the structure of switching inductors. The switching inductors consist of three inductors in series and two PMOSFET switches, which are individually
A CMOS low noise amplifier with integrated front-side micromachined inductor
✍ Scribed by Roee Ben Yishay; Sara Stolyarova; Shye Shapira; Moshe Musiya; David Kryger; Yossi Shiloh; Yael Nemirovsky
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 655 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0026-2692
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this article, a small‐sized 3–10 GHz CMOS LNA for ultra‐wideband (UWB) applications is presented. To reduce 2 on‐chip inductors, wire bond inductors are used instead of input inductor of multisectional reactive network and source degeneration inductor. The noise figure of low‐noise a
## Abstract This paper presents a fully integrated concurrent dual‐band CMOS low‐noise amplifier (LNA). The LNA is implemented in a standard 0.18‐μm 6M1P CMOS process and is designed from the system viewpoint to provide higher gain at the higher band, for the first time, to compensate the higher‐ba
## Abstract In this article, a 0.5 V X‐band low noise amplifier (LNA) composed of two common‐source stages is designed and fabricated with 0.18 um CMOS technology.Based on the structure of cascaded common‐source stages and forward body bias technology, the supply voltage is reduced. Measurement res
## Abstract This article presents a novel application of the active inductor in the design of the low‐noise amplifier (LNA). To reduce the silicon area consumed by the LNA without sacrificing its linearity, the passive source‐degenerated inductor in the conventional design is replaced with the acti