𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the process parameters on the growth of YSZ-layers prepared by Ion Beam Assisted Deposition (IBAD)

✍ Scribed by A. Knierim; R. Auer; J. Geerk; Y. Li; G. Linker; O. Meyer; J. Reiner; P. Schweiss; R. Smithey

Book ID
114169049
Publisher
Elsevier Science
Year
1997
Tongue
English
Weight
520 KB
Volume
127-128
Category
Article
ISSN
0168-583X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of the deposition rate on ITO thi
Effect of the deposition rate on ITO thin film properties prepared by ion beam assisted deposition (IBAD) technique
✍ Meng, Li-Jian ;Teixeira, V. ;dos Santos, M. P. πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 507 KB

## Abstract Indium tin oxide (ITO) thin films have been deposited onto glass substrates at room temperature by ion beam assisted deposition technique at different deposition rates (0.1–0.3 nm/s). The effects of the deposition rate on the structural, optical and electrical properties of the deposite

Effect of beam voltage on the properties
Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition
✍ J. H. Edgar; C. A. Carosella; C. R. Eddy; D. T. Smith πŸ“‚ Article πŸ“… 1996 πŸ› Springer US 🌐 English βš– 709 KB

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (1 1 1), Si (1 00) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disord