Electrical properties of Si/SiO2/Si structures produced by direct bonding of pre-oxidized silicon wafers
โ Scribed by A. Fedotov; Anis M.H. Saad; K. Enisherlova; A. Mazanik; B.G. Gorachev; E.M. Temper
- Publisher
- Elsevier Science
- Year
- 2003
- Tongue
- English
- Weight
- 331 KB
- Volume
- 66
- Category
- Article
- ISSN
- 0167-9317
No coin nor oath required. For personal study only.
โฆ Synopsis
The properties of BESOI p-Si / SiO / p-Si and n-Si / SiO / n-Si structures manufactured by direct bonding of 2 2
pre-oxidized Czochralski p-and n-type (100) 2-40 V ? cm silicon wafers were studied. Our study shows that the transversal static I-V and quasi-static C-V characteristics as well as the high-frequency emittance in the temperature range 77-300 K of BESOI structures with a buried oxide layer 2-100 nm thick are mainly dependent on the type of wafer conductance and the homogeneity of the oxide layer thickness. It was demonstrated that the electric properties of BESOI structures with an ultra-thin or thin separating BOX layer manufactured by direct bonding of pre-oxidized silicon wafers are strongly dependent on the parameters of the BOX layer (its thickness homogeneity), the state of Si / SiO interfaces (hydrophilic, hydrophobic, contaminated 2 by aluminum or not) and the origin of the Si / SiO interfaces both sides of the BOX layer (oxidation interface or 2 bonding interface). The irradiation hardness of MOS devices manufactured from BESOI structures with a thick separating BOX layer is also strongly dependent on the origin of the Si / SiO interface. MOS devices, where the 2 Si / SiO interface is a bonding interface, exhibited a greater hardness to g-irradiation than devices where the 2 Si / SiO interface was an oxidation interface.
2
๐ SIMILAR VOLUMES