## Abstract A microstrip dual‐mode bandpass filter (BPF) using a circular patch resonator is investigated in this paper. Unlike the conventional dual‐mode patch‐resonator bandpass filter studied in the literature, the introduced filter is perturbed by one circular hole in the northeast area of the
A triple-mode bandpass filter using a modified circular patch resonator
✍ Scribed by Ariana L. C. Serrano; Fatima Salete Correra
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 323 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article presents a triple‐mode bandpass filter using a modified circular patch resonator. Etched slots in the resonator split the TM degenerate fundamental modes and also perturb the TM mode, approximating their resonant frequencies to form a third‐order bandpass filter. A 2.42 GHz centered filter was designed and fabricated. Experimental results showed a fractional bandwidth of 29%, return loss better than 16 dB, insertion loss of 0.5 dB, and good second harmonic band rejection. The filter exhibited a size reduction of 51% compared with a filter using an unperturbed circular patch resonator at the same frequency. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 178–182, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23950
📜 SIMILAR VOLUMES
## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
## Abstract A rectangular patch resonator with four equal slits etched on sides is presented to make up a stopband‐improved dual‐mode filter. By stretching these four side slits towards the patch center, the first resonant frequency gets a gradual decrease while its second one keeps almost unchange
## Abstract Microstrip bandpass filters are widely used in a variety of microwave systems, particularly in transmitter and receiver sections etc. to select a desired band of frequencies. However, common bandpass filters have deficiencies such as several resonators coupling, coupling gaps, only one
## Abstract A novel compact wideband bandpass filter is proposed using a stub‐loaded triple‐mode resonator (TMR) with rhombus configuration. This TMR is formed by shunt‐loading a stepped‐impedance stub at the center of a half‐wavelength resonator. As this TMR is driven in its two sides by two ident
## Abstract A novel triple‐mode hexagonal bandpass filter with capacitive loading is introduced in this article.The technique, adding an open stub with capacitive loading, is applied to enlarge the equivalent self‐capacitance of the resonator, which declines its resonant frequencies. A circular pat