## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
Novel trapezoidal planar dual-mode bandpass filter using one single patch resonator
✍ Scribed by Jian-kang Xiao; Ying Li
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 311 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Microstrip bandpass filters are widely used in a variety of microwave systems, particularly in transmitter and receiver sections etc. to select a desired band of frequencies. However, common bandpass filters have deficiencies such as several resonators coupling, coupling gaps, only one attenuation pole in frequency responses, and so on. This paper proposes a triangular dual‐mode bandpass filter and two types of trapezoidal dual‐mode bandpass filters using one single patch resonators with corner cuts or crossed slots. It shows degenerate dual‐mode with corner cuts and unequaled crossed slots can improve the performances of filter greatly. The proposed filters have outstanding virtues such as novel and simple structures as they have one single patch without coupling gaps, small volume, easy integration and miniaturization, and so on. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 2142–2145, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21939
📜 SIMILAR VOLUMES
## Abstract A rectangular patch resonator with four equal slits etched on sides is presented to make up a stopband‐improved dual‐mode filter. By stretching these four side slits towards the patch center, the first resonant frequency gets a gradual decrease while its second one keeps almost unchange
## Abstract A novel multimode broadband square patch bandpass filter is proposed.The return loss of the filter is more than 11 dB and insertion loss is less than 1.2 dB within 3.47–5.22 GHz. This new filter has four transmission poles in the passband and the 3dB bandwidth is 48.9%. Measured results
## Abstract A novel compact microstrip bandpass filter using one equilateral triangular‐patch resonator with a small cut is proposed. This filter has the advantages of compact size, low insertion loss in the passband, and sharp rejection in the stopband. Moreover, without coupling gaps, this novel
## Abstract A microstrip dual‐mode bandpass filter (BPF) using a circular patch resonator is investigated in this paper. Unlike the conventional dual‐mode patch‐resonator bandpass filter studied in the literature, the introduced filter is perturbed by one circular hole in the northeast area of the
## Abstract A novel microstrip bandpass filter using a dual‐mode square‐ring resonator is presented in this paper, in which the input/output microstrip lines are arranged under the square‐ring to improve the coupling between the microstrip lines and the square‐ring. The filter has been investigated