## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
Stopband-improved dual-mode bandpass filter using side-slit patch resonator
✍ Scribed by Rui Li; Lei Zhu
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 262 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A rectangular patch resonator with four equal slits etched on sides is presented to make up a stopband‐improved dual‐mode filter. By stretching these four side slits towards the patch center, the first resonant frequency gets a gradual decrease while its second one keeps almost unchanged. This feature is attractive in widening upper stopband while miniaturizing overall size in filter design. To realize a relatively wide passband with DC‐blocking, the narrowed feed lines are deeply inserted into their respective slits, resulting in the enhanced capacitive coupling degree. Our studies imply that the spacing between the first two resonant frequencies of this resonator itself is increased by about 50% while the first spurious resonant frequency is fully rejected by introducing a pair of open‐circuited stubs in the feed lines. In final, a dual‐mode filter is optimally designed with a fractional bandwidth of 4.5% at 1.60 GHz and predicted results are confirmed by experiment. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 717–720, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22221
📜 SIMILAR VOLUMES
## Abstract This paper presents the improved stopband of a novel dual‐mode bandpass filter (BPF) using an etched H‐shaped defected ground structure (DGS) at 2 GHz. The wide‐stopband characteristic results from the rejection‐band resonant characteristic of the DGS in the harmonic frequency of the du
## Abstract Microstrip bandpass filters are widely used in a variety of microwave systems, particularly in transmitter and receiver sections etc. to select a desired band of frequencies. However, common bandpass filters have deficiencies such as several resonators coupling, coupling gaps, only one
## Abstract A microstrip dual‐mode bandpass filter (BPF) using a circular patch resonator is investigated in this paper. Unlike the conventional dual‐mode patch‐resonator bandpass filter studied in the literature, the introduced filter is perturbed by one circular hole in the northeast area of the
## Abstract This paper presents a dual‐band bandpass filter by introducing transmission zeroes in the passband of a broadband bandpass filter using square‐loop dual‐mode resonators. The transmission zeroes are achieved by using a dual‐mode resonator. The dual‐mode resonator is attached to two trans
## Abstract A dual‐mode bandpass filter (BPF) using the degenerate modes of a meander square‐ring structure printed on the high‐permittivity substrate is proposed. The dual‐mode resonator is based on a square‐ring loaded with two meander strips at the coupling sides. The filter is printed on the Al