that a very coarse grid was used with EF equations, with only two cells between the microstrip and the ground plane and four cells across the microstrip. The maximum error in the 20แ60 GHz frequency band is 1.5, 6.7, and 13.5% using the enhanced EF, split-cell, and staircase techniques, respectively
Single-feed slotted equilateral-triangular microstrip antenna for circular polarization
โ Scribed by Jui-Han Lu, ; Chia-Luan Tang, ; Kin-Lu Wong,
- Book ID
- 119967902
- Publisher
- IEEE
- Year
- 1999
- Tongue
- English
- Weight
- 178 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0018-926X
- DOI
- 10.1109/8.785749
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract Novel compact circular polarization (CP) designs of a singleโfeed triangular microstrip antenna with a triangular slot or an inverted triangular slot are proposed and experimentally studied. For the design with a triangular slot, CP operation can easily be achieved by inserting a slit w
By loading a bent slot of 60ะ close to each triangle tip, a noยจel dual-frequency design of a single-feed equilateral-triangular microstrip antenna is proposed and studied. By ยจarying the length of the bent slots, the present dual-frequency design can haยจe a tunable frequency ratio of ; 1.4แ2.0, with
The design of a single-feed, reduced-size circularly polarized circular microstrip antenna with four slits equally spaced and inset at the boundary of the circular patch is experimentally inยจestigated. Results show that by increasing the slits' lengths to be about 0.8 times the disk radius, the circ
## Abstract A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an Lโshaped strip with a taper end, connected in series to a microstripโlineโfed located along the diagonal line of the circularโslot. The measured results demonstrated a CP