## Abstract Designs of circularly polarized printed shorted annual and square ring‐slot antennas are proposed. Circular polarization (CP) radiation of the shorted ring‐slot antennas is achieved by selecting a proper length of the shorted section in the ring slot, which is about 3.9 and 8% of the me
Microstrip-fed circular slot antenna for circular polarization
✍ Scribed by Lin-Yu Tseng; Tuan-Yung Han
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 167 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an L‐shaped strip with a taper end, connected in series to a microstrip‐line‐fed located along the diagonal line of the circular‐slot. The measured results demonstrated a CP and impedance bandwidth of around 44% and 38%, respectively. It is noted that the CP bandwidth of 44% is much larger than those of antennas found in the literature. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1056–1058, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23290
📜 SIMILAR VOLUMES
## Abstract The design of a circularly polarized slot antenna fed by a single microstrip line is presented. The circularly polarized radiation is achieved by means of using a shorted square‐ring slot. This proposed antenna has the fundamental resonant frequency of 2.4 GHz with the minimum return lo
## Abstract A novel design of a probe‐fed circular microstrip antenna with a group of four slits inserted at the circular patch boundary for achieving compact circular polarization (CP) operation is presented. The proposed design can make its excited fundamental‐mode patch surface current path much
## A new design of aperture-coupled microstrip antennas for circular polarization (CP) is presented. The CP microstrip antenna is excited by using a series microstrip-line-feed configuration through the coupling of a ring slot in the ground. The effects of different ring-slot sizes on CP performance
## Abstract Development of a new compact circular‐sided microstrip antenna is presented. This antenna offers considerable area reduction compared to standard rectangular microstrip antenna designed for the same frequency. Typical antenna design and experimental results for circular polarization are
## Abstract To meet the required precision and reliability for global positioning systems, a probe‐feed dual‐band circularly polarized (CP) microstrip antenna is proposed.This new microstrip antenna design uses a circular patch that is printed on a two‐layer substrate consisting of an FR4 dielectri