## Abstract A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an L‐shaped strip with a taper end, connected in series to a microstrip‐line‐fed located along the diagonal line of the circular‐slot. The measured results demonstrated a CP
Circular-slotted microstrip antenna for GPS
✍ Scribed by Xu-Bao Sun
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 276 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
To meet the required precision and reliability for global positioning systems, a probe‐feed dual‐band circularly polarized (CP) microstrip antenna is proposed.This new microstrip antenna design uses a circular patch that is printed on a two‐layer substrate consisting of an FR4 dielectric layer and a foam layer, and cutting a crossed‐slot and an open ring‐slot in the circular patch. When compared with the conventional dual‐band CP antenna with two patches among substrate materials, not only is the performance of the antenna improved but also its fabrication becomes easier. The simulated and measured results indicate the validity of the design. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 999–1000, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25095
📜 SIMILAR VOLUMES
## A new design of aperture-coupled microstrip antennas for circular polarization (CP) is presented. The CP microstrip antenna is excited by using a series microstrip-line-feed configuration through the coupling of a ring slot in the ground. The effects of different ring-slot sizes on CP performance
## Abstract A compact circularly‐polarized (CP) design of a microstrip patch antennas is presented. The proposed antenna is fed by the coupling of a ring slot in the ground plane of a microstrip line. The results show that the required patch size of the proposed design at a fixed CP operating frequ
This paper presents a new, compact, dual-frequency design of single-feed circular microstrip antennas with an offset circular slot placed close to the patch boundary. It is found that, when the radius of the offset slot is about 0.38᎐0.62 times the radius of the circular patch, dual-frequency operat
## Abstract Designs of circularly polarized printed shorted annual and square ring‐slot antennas are proposed. Circular polarization (CP) radiation of the shorted ring‐slot antennas is achieved by selecting a proper length of the shorted section in the ring slot, which is about 3.9 and 8% of the me