Figure Reflection coefficient as a function of the frequency and the resolution interpolation conductivity was chosen in order to obtain a normal theoretical reflection coefficient of 0.001% s y100 dB. Results for the reflection coefficient as a function of frequency are presented in Figure . ## 6
Circular microstrip antenna with a sector-slot for dual-port operation
β Scribed by Deepti Das Krishna; C. K. Aanandan; P. Mohanan; K. Vasudevan
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 116 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A new design of a slot-loaded rectangular microstrip antenna for single-feed dual-frequency operation is proposed and experimentally studied. The slots loaded in the patch are a pair of bent slots centered in the patch and oriented along the resonant direction, with the spacing between the two slots
## Abstract Dualβfrequency operation is achieved from a compact microstrip antenna by loading a pair of narrow slots close to its radiating edges. The two frequencies have parallel polarization planes and similar radiation characteristics. The ratio between the two operating frequencies can be tune
## Abstract The design of a printed slot antenna with dualβband circular polarization (CP) characteristic is presented. The proposed antenna is excited by an Lβshaped strip with a taper end, connected in series to a microstripβlineβfed located along the diagonal line of the squareβslot. Wide impeda
This paper presents a new, compact, dual-frequency design of single-feed circular microstrip antennas with an offset circular slot placed close to the patch boundary. It is found that, when the radius of the offset slot is about 0.38α0.62 times the radius of the circular patch, dual-frequency operat
A new design of reduced-size, dual-frequency circular microstrip antenna is presented. The patch-size reduction is achie¨ed by cutting four equally spaced slits at the boundary of the circular patch. The two operating frequencies can be controlled by selecting a suitable disk radius and adjusting th