## Abstract A novel design of a probe‐fed circular microstrip antenna with a group of four slits inserted at the circular patch boundary for achieving compact circular polarization (CP) operation is presented. The proposed design can make its excited fundamental‐mode patch surface current path much
Compact circular-sided microstrip antenna for circular polarization
✍ Scribed by Sona O. Kundukulam; Manju Paulson; C. K. Aanandan; P. Mohanan
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 88 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Development of a new compact circular‐sided microstrip antenna is presented. This antenna offers considerable area reduction compared to standard rectangular microstrip antenna designed for the same frequency. Typical antenna design and experimental results for circular polarization are also demonstrated. The antenna has a 3‐dB axial ratio bandwidth of 1.5%. © 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 34: 176–177, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10408
📜 SIMILAR VOLUMES
## Abstract By embedding a group of four bent slots in the equilateral‐pentagon patch and introducing a peripheral cut at the patch boundary, a compact pentagon microstrip antenna with circularly polarized (CP) operation can be implemented using a probe feed. Results have been obtained that, for a
## Abstract A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an L‐shaped strip with a taper end, connected in series to a microstrip‐line‐fed located along the diagonal line of the circular‐slot. The measured results demonstrated a CP
## Abstract A compact circularly‐polarized (CP) design of a microstrip patch antennas is presented. The proposed antenna is fed by the coupling of a ring slot in the ground plane of a microstrip line. The results show that the required patch size of the proposed design at a fixed CP operating frequ
The design of a single-feed, reduced-size circularly polarized circular microstrip antenna with four slits equally spaced and inset at the boundary of the circular patch is experimentally in¨estigated. Results show that by increasing the slits' lengths to be about 0.8 times the disk radius, the circ
## Abstract A single‐layer and single‐probe‐feed dual‐frequency semicircular microstrip antenna with a shorting plane is presented. Compared with a circular microstrip antenna operating at fixed frequencies, a large area reduction can be obtained. By varying the shorting‐plane width, the two resona