## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
Novel Dual-Mode Balun Bandpass Filters Using Single Cross-Slotted Patch Resonator
✍ Scribed by Sheng Sun; Menzel, W.
- Book ID
- 117990302
- Publisher
- IEEE
- Year
- 2011
- Tongue
- English
- Weight
- 499 KB
- Volume
- 21
- Category
- Article
- ISSN
- 1531-1309
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Microstrip bandpass filters are widely used in a variety of microwave systems, particularly in transmitter and receiver sections etc. to select a desired band of frequencies. However, common bandpass filters have deficiencies such as several resonators coupling, coupling gaps, only one
## Abstract This article presents a miniaturized dual‐mode bandpass filter (BPF) with two transmission zeros and low insertion‐loss using crossed slotted patch resonator. The BPF is mainly formed by a λ/2 patch resonator which is a pair of crossed slots with unequal widths is embedded in the center
## Abstract This article presents a miniaturized dual‐mode narrow bandpass filter using an equilateral triangular patch resonator with an inverted T‐shaped slot, which exhibited a size reduction of 37% compared with a single‐mode equilateral triangular patch at the same frequency. Two‐ and four‐pol
## Abstract A slot‐type split‐ring resonator (SRR) as a new type of perturbation element for dual‐mode square patch resonator is introduced in this article.The slot‐type SRR used in the patch resonator allows coupling between the two degenerate modes. Moreover, coupling characteristics can be adjus