## Abstract A microstrip dual‐mode bandpass filter (BPF) using a circular patch resonator is investigated in this paper. Unlike the conventional dual‐mode patch‐resonator bandpass filter studied in the literature, the introduced filter is perturbed by one circular hole in the northeast area of the
A novel crossed slotted patch dual-mode bandpass filter with two transmission zeros
✍ Scribed by Sean Wu; Min-Hang Weng; Shih-Bin Jhong; Maw-Shung Lee
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 358 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article presents a miniaturized dual‐mode bandpass filter (BPF) with two transmission zeros and low insertion‐loss using crossed slotted patch resonator. The BPF is mainly formed by a λ/2 patch resonator which is a pair of crossed slots with unequal widths is embedded in the center. By tuning the perturbation element, which resulted from the unequal slot widths along the diagonal, two resonant modes are excited and a pair of transmission zeros are generated to improve the selectivity of the BPF performance. The proposed filter at center frequency (f~0~) of 1.55 GHz has very good measured characteristics including the bandwidth of 1.49–1.62 GHz (3‐dB fractional bandwidth of 8.4%), low insertion loss of 1.74 ± 0.35 dB. The measured filter performance is in good agreement with the simulated response. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 741–744, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23219
📜 SIMILAR VOLUMES
## Abstract A microstrip bandpass filter using a dual‐spiral configuration is proposed. Unlike conventional filter topology, this filter is integrated directly within 50Ω microstrip lines. The filter has a simple configuration, and compact size, and is easy to fabricate. Two transmission zeros clos
## Abstract A miniature and harmonic control patch dual‐mode bandpass filter (BPF) with transmission zeros for application of global positioning system (GPS) is proposed. The right crossed‐slots of the patch resonator are used to determine the main passband frequency of the BPF. In this study, by u
## Abstract This paper presents a new compact and simple microstrip‐patch bandpass filter structure using only one resonator. This filter has two transmission zeros on the both sides of the passband. The volume of this filter is about 1/3 or 1/2 of a conventional filter. Because the new filter is w
## Abstract We proposed a novel dual‐mode dual band bandpass filter (BPF) operating at 2.4/5.7 GHz by using a right cross‐slotted patch resonator (RCSPR) combined with a pair of square etched areas (SEAs). A pair of right crossed slot embedded in the center of the patch resonator is used to tune th
## Abstract Without any perturbations on the surface of the patch resonator or orthogonal feed lines, a novel microstrip dual‐mode triangular‐patch bandpass filter with slotted I/O is introduced in this letter. The degenerate modes are excited by the use of the slotted I/O. Also, the coupling chara