✦ LIBER ✦

Design of a miniature and harmonic control patch dual-mode bandpass filter with transmission zeros

✍ Scribed by Yan-Kuin Su; Jau-Rung Chen; Min-Hang Weng; Cheng-Yuan Hung

Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 412 KB
Volume: 50
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.23604

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A miniature and harmonic control patch dual‐mode bandpass filter (BPF) with transmission zeros for application of global positioning system (GPS) is proposed. The right crossed‐slots of the patch resonator are used to determine the main passband frequency of the BPF. In this study, by using a pair of square etched areas (SEAs) acted as perturbation elements, the dual mode filtering performance can be excited and two transmission zeros located on either side of the passband are clearly observed. It is found that two transmission zeros can improve the selectivity of the BPF as well as the stopband rejection effectively, thus avoiding the interference from other communication systems. The measured results of the fabricated BPF are in good agreement with full wave simulation. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2161–2163, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23604

📜 SIMILAR VOLUMES

A novel crossed slotted patch dual-mode

A novel crossed slotted patch dual-mode bandpass filter with two transmission zeros

✍ Sean Wu; Min-Hang Weng; Shih-Bin Jhong; Maw-Shung Lee 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 358 KB

## Abstract This article presents a miniaturized dual‐mode bandpass filter (BPF) with two transmission zeros and low insertion‐loss using crossed slotted patch resonator. The BPF is mainly formed by a λ/2 patch resonator which is a pair of crossed slots with unequal widths is embedded in the center

Dual-mode microstrip bandpass filter usi

Dual-mode microstrip bandpass filter using circular patch resonator with two transmission zeros

✍ JiaLin Li; JianXin Chen; JianPeng Wang; Quan Xue; Wei Shao; Lei Xia; LiangJin Xu 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 76 KB

## Abstract A microstrip dual‐mode bandpass filter (BPF) using a circular patch resonator is investigated in this paper. Unlike the conventional dual‐mode patch‐resonator bandpass filter studied in the literature, the introduced filter is perturbed by one circular hole in the northeast area of the

Design of a new dual-band microstrip ban

Design of a new dual-band microstrip bandpass filter with multiple transmission zeros

✍ Lin Li; Zheng-Fan Li 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 186 KB

## Abstract A novel dual‐band microstrip bandpass filter with multiple transmission zeros has been proposed in this article. Dual‐band resonators composed of one shunt short‐circuited stub and one shunt open‐circuited stub are connected by dual‐band admittance inverters (J‐inverters) to create dual

Design of a dual-mode bandpass filter wi

Design of a dual-mode bandpass filter with wide stopband performance for GPS application

✍ Hon Kuan; Heng-Yau Pan 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB

## Abstract In this article, we propose a dual‐mode bandpass filter (BPF) at 1.575 GHz using periodic meander slotted ground structures (M‐SGSs) which are etched on the ground plane for spurious suppression. First, single M‐SGS is analyzed. Second, the M‐SGSs are used to provide a good stopband‐rej