## Abstract A novel dual‐mode band‐pass filter with a cross‐shaped resonator and three ring resonators has been designed and implemented. The proposed structure is different from the conventional dual‐mode band‐pass filter. The designed dual‐mode band‐pass filter has a very sharp attenuation rate b
Design of a dual-mode bandpass filter with wide stopband performance for GPS application
✍ Scribed by Hon Kuan; Heng-Yau Pan
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 220 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, we propose a dual‐mode bandpass filter (BPF) at 1.575 GHz using periodic meander slotted ground structures (M‐SGSs) which are etched on the ground plane for spurious suppression. First, single M‐SGS is analyzed. Second, the M‐SGSs are used to provide a good stopband‐rejection to the second harmonics of the dual‐mode BPF with level of over −40 dB. Finally, a dual‐mode BPF with improved stopband is designed, fabricated, and measured. The experimental results of the fabricated filter measured by the network analyzer have good agreement with the simulation results. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 445–447, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23123
📜 SIMILAR VOLUMES
## Abstract In this work, a novel microstrip bandpass filter with a wide stopband is proposed. With the assistance of an open stub, one modified open‐circuit coupled line with symmetrical feeding, a long transmission line, and a wide stopband with a sufficient rejection level can be achieved. Detai
## Abstract In this article, a bandpass filter with a wide stopband is proposed for the wireless local area network (WLAN) system. The filter is mainly composed of a dual‐mode bandpass filter (DM‐BPF) and a controllable bandstop structure (CBS). By using the CBS, multiple transmission zeros can be
## Abstract This article presents the design of a compact fourth‐order cross‐coupled dual‐band bandpass filter (BPF) having a wide upper‐end stopband. Quarter‐wavelength (__λ__/4) stepped‐impedance resonators (SIRs) were employed to construct the BPF to have a relatively small circuit size and high
## Abstract The novel compact dual‐band bandpass filter (BPF) by using diverse quarter‐wavelength (λ/4) resonators for global position system (GPS)/wireless local area network (WLAN) applications is proposed for the first time. The use of two interdigital‐like λ/4 resonators of the proposed BPF eff
## Abstract A miniature and harmonic control patch dual‐mode bandpass filter (BPF) with transmission zeros for application of global positioning system (GPS) is proposed. The right crossed‐slots of the patch resonator are used to determine the main passband frequency of the BPF. In this study, by u