## Abstract A novel dual‐mode band‐pass filter with a cross‐shaped resonator and three ring resonators has been designed and implemented. The proposed structure is different from the conventional dual‐mode band‐pass filter. The designed dual‐mode band‐pass filter has a very sharp attenuation rate b
A dual-mode bandpass filter with a wide stopband using a controllable bandstop structure
✍ Scribed by Cheng-Yuan Hung; Min-Hang Weng; Ru-Yuan Yang
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 377 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a bandpass filter with a wide stopband is proposed for the wireless local area network (WLAN) system. The filter is mainly composed of a dual‐mode bandpass filter (DM‐BPF) and a controllable bandstop structure (CBS). By using the CBS, multiple transmission zeros can be located on the spurious responses of the DM‐BPF. The design procedure is discussed in detail in this article. The designed filter is fabricated and measured. Measured results have a good agreement with the simulated results. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2214–2216, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23610
📜 SIMILAR VOLUMES
## Abstract In this article, we propose a dual‐mode bandpass filter (BPF) at 1.575 GHz using periodic meander slotted ground structures (M‐SGSs) which are etched on the ground plane for spurious suppression. First, single M‐SGS is analyzed. Second, the M‐SGSs are used to provide a good stopband‐rej
## Abstract This paper presents the improved stopband of a novel dual‐mode bandpass filter (BPF) using an etched H‐shaped defected ground structure (DGS) at 2 GHz. The wide‐stopband characteristic results from the rejection‐band resonant characteristic of the DGS in the harmonic frequency of the du
## Abstract This letter proposes a parallel coupled‐line bandpass filter (BPF) using the folded slotted ground structures (SGSs) to improve the wide stopband. It is shown that the designed folded SGS has a very small area in comparison of previous works. The folded SGS exhibits a dual stopband char
## Abstract In this work, a novel microstrip bandpass filter with a wide stopband is proposed. With the assistance of an open stub, one modified open‐circuit coupled line with symmetrical feeding, a long transmission line, and a wide stopband with a sufficient rejection level can be achieved. Detai
## Abstract To obtain a very good performance of filter in wireless system, a miniaturized microstrip narrowband bandpass filter (BPF) is investigated based on an open‐loop resonator analysis. The newly designed BPF has been given with two advantages: one is of a compact size and the other is of a