## Abstract A simple semicircular‐patch bandpass filter (BPF) is presented in this letter. The slot between two semicircular‐patch resonators provides DC blocking and a strong coupling, while the slotted orthogonally feed lines are used to obtain the dual‐mode characteristics. Measurement demonstra
A right slotted patch dual-mode dual band bandpass filter used for WLAN
✍ Scribed by Yan-Kuin Su; Jau-Rung Chen; Min-Hang Weng; Cheng-Yuan Hung
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 328 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
We proposed a novel dual‐mode dual band bandpass filter (BPF) operating at 2.4/5.7 GHz by using a right cross‐slotted patch resonator (RCSPR) combined with a pair of square etched areas (SEAs). A pair of right crossed slot embedded in the center of the patch resonator is used to tune the resonant modes having 2.4/5.7 GHz responses. In this design, a pair of SEAs etched within the RCSPR is provided to be the perturbation element to generate the filter performance with the transmission zeros near the passband edges. It is shown that the fabricated filter has good dual‐band performances at 2.4/5.7 GHz with high selectivity, narrow bandwidth, and very sharp attenuation rate due to the existence of the transmission zeros. Measured results of the fabricated BPF have a good agreement with the full‐wave simulation results. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 491–494, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24078
📜 SIMILAR VOLUMES
## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
## Abstract This article proposes the design of tunable dual‐band filters for multiband multistandard systems, specifically for wireless local‐area network applications. The two main goals are to provide frequency tunability in the second band while maintaining the first band fixed and to obtain a
## Abstract Without any perturbations on the surface of the patch resonator or orthogonal feed lines, a novel microstrip dual‐mode triangular‐patch bandpass filter with slotted I/O is introduced in this letter. The degenerate modes are excited by the use of the slotted I/O. Also, the coupling chara
## Abstract This article presents a miniaturized dual‐mode bandpass filter (BPF) with two transmission zeros and low insertion‐loss using crossed slotted patch resonator. The BPF is mainly formed by a λ/2 patch resonator which is a pair of crossed slots with unequal widths is embedded in the center
## Abstract This letter presents a novel compact dual‐band bandpass filter (BPF), which consists of two pairs of half‐guided wavelength slot‐line resonators. The two pairs of resonators, operating at different frequencies, generate two passbands for the proposed BPF by utilizing a novel coupling sc