## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
Low-loss triangular-patch dual-mode bandpass filter with slotted input/output
✍ Scribed by Haiwen Liu; Zhiqun Cheng; Lingling Sun
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 191 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Without any perturbations on the surface of the patch resonator or orthogonal feed lines, a novel microstrip dual‐mode triangular‐patch bandpass filter with slotted I/O is introduced in this letter. The degenerate modes are excited by the use of the slotted I/O. Also, the coupling characteristics of two degenerate modes are studied with respect to main design parameters. A dual‐mode filter with 0.8 dB insertion loss in the passband was designed and fabricated. Measurement verify the validity of the proposed design method. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 147–149, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22072
📜 SIMILAR VOLUMES
## Abstract A microstrip triangular‐patch dual‐mode filter using quasi‐fork recessed tapped I/O is designed and fabricated. The proposed filter uses quasi‐fork recessed tapped I/O for enhanced coupling and dual‐mode excitation. The filter characteristics, which are influenced by the recessed depth
## Abstract This article presents a miniaturized dual‐mode bandpass filter (BPF) with two transmission zeros and low insertion‐loss using crossed slotted patch resonator. The BPF is mainly formed by a λ/2 patch resonator which is a pair of crossed slots with unequal widths is embedded in the center
## Abstract A novel bandpass filter using a dual‐mode square‐patch resonator is proposed in this article. The input and the output of the filter are constructed on a coplanar‐waveguide (CPW) and a microstrip line, respectively. Therefore, a transition of CPW/microstrip may be simultaneously realize
## Abstract A compact microstrip dual‐mode bandpass filter with inserted spur‐lines at the edge of the patch is proposed. In order to obtain a low insertion loss, the proposed filter has no coupling gaps. Also, it has a size reduction of about 45% at the same resonant frequency as compared conventi