## Abstract Without any perturbations on the surface of the patch resonator or orthogonal feed lines, a novel microstrip dual‐mode triangular‐patch bandpass filter with slotted I/O is introduced in this letter. The degenerate modes are excited by the use of the slotted I/O. Also, the coupling chara
Compact and low-insertion-loss dual-mode patch filter with spur-lines
✍ Scribed by Y. Sung; B. Y. Kim; C. S. Ahn; Y.-S. Kim
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 75 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A compact microstrip dual‐mode bandpass filter with inserted spur‐lines at the edge of the patch is proposed. In order to obtain a low insertion loss, the proposed filter has no coupling gaps. Also, it has a size reduction of about 45% at the same resonant frequency as compared conventional dual‐mode bandpass filters. Feed lines with offset are applied to ensure a minimal mismatch. From the measured results, the dual‐mode filter has a 0.58‐dB insertion loss at 1.27 GHz with 12% bandwidth. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 43: 33–34, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20366
📜 SIMILAR VOLUMES
## Abstract A microstrip triangular‐patch dual‐mode filter using quasi‐fork recessed tapped I/O is designed and fabricated. The proposed filter uses quasi‐fork recessed tapped I/O for enhanced coupling and dual‐mode excitation. The filter characteristics, which are influenced by the recessed depth
## Abstract A novel transversal bandpass filter is proposed in this letter. Different from conventional two‐order planar transversal filter, the proposed filter is a three‐order planar transversal filter by incorporating microstrip dual‐mode open‐loop resonator and slot line resonator. Furthermore,