✦ LIBER ✦

Nanostructure and optical properties of CeO2 thin films obtained by plasma-enhanced chemical vapor deposition

✍ Scribed by D. Barreca; G. Bruno; A. Gasparotto; M. Losurdo; E. Tondello

Publisher: Elsevier Science
Year: 2003
Tongue: English
Weight: 678 KB
Volume: 23
Category: Article
ISSN: 0928-4931
DOI: 10.1016/j.msec.2003.09.103

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optical properties of nanocrystalline si

Optical properties of nanocrystalline silicon films deposited by plasma-enhanced chemical vapor deposition

✍ Atif Mossad Ali 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 433 KB

Magnetic and optical properties of Zn1−x

Magnetic and optical properties of Zn1−xCoxO thin films prepared by plasma enhanced chemical vapor deposition

✍ W.Q. Zou; Z.R. Mo; Z.L. Lu; Z.H. Lu; F.M. Zhang; Y.W. Du 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 248 KB

Structural properties of SiO2 films prep

Structural properties of SiO2 films prepared by plasma-enhanced chemical vapor deposition

✍ Fabio Iacona; Giulio Ceriola; Francesco La Via 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

Deposition of thin films of Zirconium an

Deposition of thin films of Zirconium and Hafnium Boride by plasma enhanced chemical vapor deposition

✍ Silvia Reich; Prof. Harald Suhr; Klára Hankó; Prof. László Szepes 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 2 views

ChemInform Abstract: Deposition of Elect

ChemInform Abstract: Deposition of Electrochromic Tungsten Oxide Thin Films by Plasma- Enhanced Chemical Vapor Deposition.

✍ W. B. HENLEY; G. J. SACKS 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 27 KB 👁 2 views

Structure and Thermal Properties of Thin

Structure and Thermal Properties of Thin Film Poly(α-methylstyrene) Deposited via Plasma-Enhanced Chemical Vapor Deposition

✍ D.D. Burkey; K.K. Gleason 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB

## Abstract Plasma‐enhanced (PE) CVD from α‐methylstyrene is a dry method for synthesizing directly patternable sacrificial materials for generating pores or air dielectric layers. Films deposited at low power excitation (40 W) decompose between 65 °C and 75 °C, leave minimal residue following a 40