✦ LIBER ✦

Magnetic and optical properties of Zn1−xCoxO thin films prepared by plasma enhanced chemical vapor deposition

✍ Scribed by W.Q. Zou; Z.R. Mo; Z.L. Lu; Z.H. Lu; F.M. Zhang; Y.W. Du

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 248 KB
Volume: 403
Category: Article
ISSN: 0921-4526
DOI: 10.1016/j.physb.2008.06.012

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Structure and properties of metallic Sn

Structure and properties of metallic SnZn alloy films prepared by plasma-enhanced metalorganic chemical vapor deposition

✍ T.J Lin; T.J O'Keefe; W.J James 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 857 KB

Properties of hydrogenated amorphous sil

Properties of hydrogenated amorphous silicon carbide films prepared by plasma-enhanced chemical vapor deposition

✍ Dan Kuhman; Steve Grammatica; Frank Jansen 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 416 KB

Annealing of silicon nitride thin films

Annealing of silicon nitride thin films prepared by plasma-enhanced chemical vapor deposition with helium dilution

✍ J.C. Bruyère; B. Reynes; C. Savall; C. Roch 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 515 KB

Deposition of thin films of Zirconium an

Deposition of thin films of Zirconium and Hafnium Boride by plasma enhanced chemical vapor deposition

✍ Silvia Reich; Prof. Harald Suhr; Klára Hankó; Prof. László Szepes 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 2 views

ChemInform Abstract: Deposition of Elect

ChemInform Abstract: Deposition of Electrochromic Tungsten Oxide Thin Films by Plasma- Enhanced Chemical Vapor Deposition.

✍ W. B. HENLEY; G. J. SACKS 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 27 KB 👁 2 views

Structure and Thermal Properties of Thin

Structure and Thermal Properties of Thin Film Poly(α-methylstyrene) Deposited via Plasma-Enhanced Chemical Vapor Deposition

✍ D.D. Burkey; K.K. Gleason 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB

## Abstract Plasma‐enhanced (PE) CVD from α‐methylstyrene is a dry method for synthesizing directly patternable sacrificial materials for generating pores or air dielectric layers. Films deposited at low power excitation (40 W) decompose between 65 °C and 75 °C, leave minimal residue following a 40