𝔖 Bobbio Scriptorium
✦   LIBER   ✦

MgB2 thin films on Si(1 1 1) without a buffer layer prepared by e-beam evaporation

✍ Scribed by Hong Mei Zhu; Yi Bing Zhang; Xing Lei Sun; Wen Jie Xiong; Shi Ping Zhou


Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
597 KB
Volume
452
Category
Article
ISSN
0921-4534

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Characterization of CuIn1 βˆ’ xA
✍ F. SmaΓ―li; M. Kanzari; B. Rezig πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 404 KB

Ingots containing single crystals of the quaternary alloys CuIn 1 -x Al x S 2 (CIAS) were grown by a horizontal Bridgman method for compositions with x = 0, 0.2 and x = 0.4. (CIAS) thin films were prepared by thermal evaporation technique on to glass substrates. Structural and optical properties of

Fabrication of as-grown MgB2 films on Zn
✍ Y. Harada; T. Takahashi; M. Kuroha; H. Iriuda; Y. Nakanishi; F. Izumida; H. Endo πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 168 KB

The intermetallic superconductor magnesium diboride (MgB 2 ) is a promising candidate for use in superconducting electronic devices because its high transition temperature (T c ). These applications require the development of a high-quality film fabrication process. We report the first ever attempt

Epitaxy of BaTiO3 thin film on Si(0&#xa0
✍ G. Niu; S. Yin; G. Saint-Girons; B. Gautier; P. Lecoeur; V. Pillard; G. Hollinge πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 636 KB

In this study we report the epitaxial growth of BaTiO 3 films on Si(0 0 1) substrate buffered by 5 nm-thick SrTiO 3 layer using both MBE and PLD techniques. The BaTiO 3 films demonstrate single crystalline, (0 0 1)oriented texture and atomically flat surface on SrTiO 3 /Si template. The electrical c

Hydrothermally grown ZnO buffer layer fo
✍ Seung Wook Shin; Ye Bin Kwon; A.V. Moholkar; Gi-Seok Heo; In Ok Jung; Jong-Ha Mo πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 782 KB

Gallium (4 wt%) doped ZnO (GZO) thin films were deposited on hydrothermally grown ZnO buffered and non-buffered MgAl 2 O 4 (1 1 1) substrates by RF magnetron sputtering technique at a growth temperature of 250 1C. The epitaxial ZnO buffer layer was deposited on the MgAl 2 O 4 (1 1 1) substrate by a