✦ LIBER ✦

Joining of Si3N4/Si3N4 with CuNiTiB paste brazing filler metals and interfacial reactions of the joints

✍ Scribed by Chuangeng Wan; Huaping Xiong; Zhenfeng Zhou

Book ID: 111535904
Publisher: Springer
Year: 1999
Tongue: English
Weight: 458 KB
Volume: 34
Category: Article
ISSN: 0022-2461
DOI: 10.1023/a:1004672426832

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Development of a new CuNiTiB brazing all

Development of a new CuNiTiB brazing alloy for joining Si3N4to Si3N4

✍ Huaping Xiong; Chuangeng Wan; Zhenfeng Zhou 📂 Article 📅 1998 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 686 KB

Interfacial microstructure of Si3N4/Si3N

Interfacial microstructure of Si3N4/Si3N4 brazing joint with Cu–Zn–Ti filler alloy

✍ J. Zhang; X.M. Zhang; Y. Zhou; M. Naka; Atroshenko Svetlana 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 709 KB

Interfacial microstructure of the Si3N4/

Interfacial microstructure of the Si3N4/Si3N4 joint brazed with Cu–Pd–Ti filler alloy

✍ J. Zhang; Y. Zhou; M. Naka 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 859 KB

Interfacial microstructure of Si3N4/Si3N

Interfacial microstructure of Si3N4/Si3N4joint brazed using Au–Ni–V filler alloy

✍ J. Zhang; Y. Sun; C. F. Liu; H. W. Zhang 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 424 KB

A TEM analysis of the Si3N4/Si3N4joint b

A TEM analysis of the Si3N4/Si3N4joint brazed with a Cu-Zn-Ti filler metal

✍ J. Zhang; C. F. Liu; M. Naka; Q.C. Meng; Y. Zhou 📂 Article 📅 2004 🏛 Springer 🌐 English ⚖ 318 KB

Effect of Ti content on microstructure a

Effect of Ti content on microstructure and strength of Si3N4/Si3N4 joints brazed with Cu–Pd–Ti filler metals

✍ C.F. Liu; J. Zhang; Y. Zhou; Q.C. Meng; M. Naka 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 655 KB

A novel Cu-Pd-Ti filler alloy was adopted to braze silicon nitride ceramic to itself in the form of Cu/(Ti, Pd)/Cu. The reliable Si 3 N 4 joints were obtained. The effect of Ti content on the microstructure and properties of the Si 3 N 4 joints was investigated using EPMA, SEM and three-point bendin