✦ LIBER ✦

Dual-band chip antenna design using intercoupling capacitance

✍ Scribed by Hyengcheul Choi; Hyeongdong Kim

Publisher: John Wiley and Sons
Year: 2009
Tongue: English
Weight: 355 KB
Volume: 51
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.24374

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

For the dual‐band (GSM/DCS) operation, the second‐order resonance is used to operate in the high frequency range. To control the bandwidth characteristics in each band, an intercoupling capacitance between the radiating elements is utilized to satisfy the bandwidth requirements of GSM (890–960 MHz) and DCS (1710–1880 MHz) cellular communications systems. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 1467–1470, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24374

📜 SIMILAR VOLUMES

Dual-band LTCC chip antenna design using

Dual-band LTCC chip antenna design using stacked meander patch for mobile handsets

✍ Young Do Kim; Ho-Yong Kim; Hong Min Lee 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 361 KB 👁 1 views

## Abstract This paper presents design simulation, implementation, and measurement of a miniaturized GPS/K‐PCS dual‐band LTCC chip antenna for mobile communication handsets. The dimensions of the LTCC chip antenna is 9 × 15 × 1.2 mm. The meander‐type radiating patch for dual‐band operation is reali

Designing a chip antenna with dual-band

Designing a chip antenna with dual-band by a material-loading technique

✍ Chi-Fang Huang; Pei-Lan Yeh 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 508 KB

## Abstract Based on a manufacturing technology of traditional machinery, a design method of chip antenna is proposed for the dual‐band operation of GSM wireless communication. This new approach emphasizes several skills for the optimal frequency tuning for this kind of antenna with material‐loaded

Dual-band antenna design using genetic a

Dual-band antenna design using genetic algorithm-generated topology

✍ Jae Hee Kim; Wee Sang Park 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 551 KB

## Abstract This article represents an antenna topology selection for dual‐band mobile phone using an optimization technique that applies a genetic algorithm (GA) in the early stage of the design. Commercial software (CST MWS) is used to predict the performance of the antenna. Then, the fitness fun

Dual-band antenna design using M-shaped

Dual-band antenna design using M-shaped open stub

✍ Sang Yong Park; Jong Kweon Park; Jin Suk Kim 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 705 KB

## Abstract In this article, we have introduced dual‐band antenna with M‐shaped open stub for wideband local area network (WLAN)/ultra‐wideband (UWB) applications. The M‐shaped open stub is inserted into the proposed antenna for WLAN operation. The proposed antenna is fabricated and measured. Param

Frequency variable dual bands microstrip

Frequency variable dual bands microstrip antenna design

✍ Jay Prakash Thakur; Jun-Seok Park 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 77 KB

## Abstract A new approach is proposed to design a frequency‐variable dual‐band microstrip antenna. Two unbalanced microstrip lines are used to feed microstrip patch vertically with a branch‐line coupler. The entire structure is designed on a single‐layer substrate. The resonant frequencies of the

Dual-band plastic chip antenna for GSM/D

Dual-band plastic chip antenna for GSM/DCS mobile phones

✍ Kin-Lu Wong; Saou-Wen Su; Tzung-Wern Chiou; Yeh-Chian Lin 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 157 KB 👁 1 views

## Abstract By placing a rectangular spiral conducting strip on the top, bottom, and two side surfaces of a rectangular plastic chip of dimensions 5 × 10 × 16 mm^3^, a novel plastic chip antenna capable of GSM/DCS dual‐band operations in mobile phones is presented. The plastic chip antenna has the