𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dual-band antenna design using M-shaped open stub

✍ Scribed by Sang Yong Park; Jong Kweon Park; Jin Suk Kim

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
705 KB
Volume
53
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this article, we have introduced dual‐band antenna with M‐shaped open stub for wideband local area network (WLAN)/ultra‐wideband (UWB) applications. The M‐shaped open stub is inserted into the proposed antenna for WLAN operation. The proposed antenna is fabricated and measured. Parametric studies and radiation characteristics for the designed antenna was simulated and measured. The designed antenna has the characteristics of wide bandwidth, dual‐band, and negligible dispersion over the UWB band. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:455–458, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25729

📜 SIMILAR VOLUMES

Design of dual-band antenna with U-shape
Design of dual-band antenna with U-shaped open stub for WLAN/UWB applications
✍ Jung N. Lee; Ji H. Kim; Jong K. Park; Jin S. Kim 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 981 KB

## Abstract In this article, we have proposed a dual‐band antenna with U‐shaped open stub for wideband local area network (WLAN)/ultra wideband (UWB) applications. The designed dual‐band antenna consists of two semicircle radiating patches, a rectangular slot separating the two semicircles, one ste

Design of a band-stop UWB antenna with t
Design of a band-stop UWB antenna with two L-shaped stubs
✍ Jaekon Shin; Seokjin Hong; Jaehoon Choi 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 498 KB 👁 1 views

## Abstract In this article, a novel ultra‐wideband (UWB) antenna with band‐stop characteristic is proposed. The UWB characteristic of the proposed antenna is achieved by adopting two spiral elements. By attaching two L‐shaped stubs along the microstrip feed line, the band‐stop performance can be a

Dual-band chip antenna design using inte
Dual-band chip antenna design using intercoupling capacitance
✍ Hyengcheul Choi; Hyeongdong Kim 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

## Abstract For the dual‐band (GSM/DCS) operation, the second‐order resonance is used to operate in the high frequency range. To control the bandwidth characteristics in each band, an intercoupling capacitance between the radiating elements is utilized to satisfy the bandwidth requirements of GSM (

Band-notched ultra-wideband planar monop
Band-notched ultra-wideband planar monopole antenna using shunt open-circuited stub
✍ Chien-Yuan Pan; Kuo-Yung Chiu; Jhih-Hao Duan; Jen-Yea Jan 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 319 KB 👁 1 views

## Abstract This article presents an ultra‐wideband planar monopole antenna with band‐notched characteristics.The proposed antenna consists of a sector monopole and a microstrip feedline with a quarter‐wavelength open‐circuited transmission line (a stub). The open‐circuited stub is connected in par

A novel dual-band balun using branch-lin
A novel dual-band balun using branch-lines with open stubs
✍ Seung Yoon Yang; Choon Sik Cho; Jae W. Lee; Jaeheung Kim 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 252 KB

## Abstract This letter presents a novel dual‐band balun using the branch‐line configuration. We establish design equations for dual‐band balun based on the even‐odd mode method. The proposed circuit operates at 2.45 GHz and 5.25 GHz. The single‐ended power is divided differentially at the balanced

A tunable dual band notch on a UWB print
A tunable dual band notch on a UWB printed slot monopole antenna by using open circuit stubs
✍ Sajad Mohammad Ali Nezhad; Gholamreza Dadashzadeh; Ali Foudazi 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 543 KB

## Abstract A new printed wide slot antenna with single‐ and dual‐band notch behavior is presented. The base of antenna is a simple fork‐shaped radiating patch, which covers the ultra‐wideband (UWB) frequency range. By using additional protrudent open circuit stubs on the base patch, multiband notc