## Abstract In this article, a novel ultra‐wideband (UWB) antenna with band‐stop characteristic is proposed. The UWB characteristic of the proposed antenna is achieved by adopting two spiral elements. By attaching two L‐shaped stubs along the microstrip feed line, the band‐stop performance can be a
Design of dual-band antenna with U-shaped open stub for WLAN/UWB applications
✍ Scribed by Jung N. Lee; Ji H. Kim; Jong K. Park; Jin S. Kim
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 981 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, we have proposed a dual‐band antenna with U‐shaped open stub for wideband local area network (WLAN)/ultra wideband (UWB) applications. The designed dual‐band antenna consists of two semicircle radiating patches, a rectangular slot separating the two semicircles, one step for impedance matching, and coplanar waveguide (CPW) feeding. Two kinds of prototypes (CPW‐fed UWB antenna and the dual‐band antenna with U‐shaped open stub) are fabricated and measured. Parametric studies and radiation characteristics for the two antennas are presented. The designed antenna has the figure‐of‐eight radiation pattern, wide bandwidth, and negligible dispersion over the operating frequency band. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 284–289, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24033
📜 SIMILAR VOLUMES
## Abstract A two‐element diversity planar antenna for a multiple‐input multiple‐output application is proposed. By adopting two Y‐shaped radiators, the antenna provides wideband impedance matching characteristics over the desired frequency band. To reduce the mutual coupling between two radiating
## Abstract A novel design of dual‐band monopole antenna fed by a coplanar waveguide (CPW) for wireless local area network (WLAN) applications is presented. By using dual L‐shaped strips, the impedance bandwidth of 5 GHz band is significantly increased. The measured impedance bandwidth for −10 dB r
## Abstract In this study, a multiple U‐shaped slot microstrip patch antenna for application in the 5‐GHz band is designed and fabricated. To obtain sufficient bandwidth in the operating band, foam is inserted between the substrate and ground plane, a coaxial probe source is used, and the position
## Abstract In this article, we present a simple surface‐mountable monopole antenna for dual‐band DCS1800 and 2.4‐GHz WLAN operations. The antenna was obtained by folding a metallic strip into a V‐shape, and soldered to a 50‐Ω microstrip feed line printed on a metallized substrate. The proposed ant
## Abstract This article describes the design, fabrication, and measurement of a novel π‐shaped dual‐band antenna with a shorting pin for 5.2/5.8 GHz wireless local area network (WLAN) systems.To obtain sufficient bandwidth when return loss (RL) < −10 dB, a shorting pin is inserted in the patch and