## Abstract In this paper, a multiple U‐shaped slot antenna is described, designed, fabricated, and measured for Hiper‐LAN. The design is based on a U‐shaped slot and two inverted U‐shaped slots. To obtain sufficient bandwidth, a foam layer is inserted between the ground plane and substrate. A meas
Design of multiple U-shaped slot microstrip patch antenna for 5-GHz band WLANs
✍ Scribed by Jeong Min Ju; Gyey-Teak Jeong; Joong-Han Yoon; Sung-Won Ko; Kyung-Sup Kwak
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 219 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this study, a multiple U‐shaped slot microstrip patch antenna for application in the 5‐GHz band is designed and fabricated. To obtain sufficient bandwidth in the operating band, foam is inserted between the substrate and ground plane, a coaxial probe source is used, and the position of the probe shift is adjusted from the center to the left. The measured result (5.02–5.955 GHz) of the fabricated antenna satisfies the conditions of VSWR < 2.0 in 5‐GHz band (5.15–5.35 GHz, 5.47–5.725 GHz, and 5.725–5.825 GHz): gain of 3.88–9.28 dBi and broad radiation pattern. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 43: 486–488, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20510
📜 SIMILAR VOLUMES
## Abstract This article describes the design, fabrication, and measurement of a novel π‐shaped dual‐band antenna with a shorting pin for 5.2/5.8 GHz wireless local area network (WLAN) systems.To obtain sufficient bandwidth when return loss (RL) < −10 dB, a shorting pin is inserted in the patch and
## Abstract In this paper, a weathercock‐shaped microstrip patch antenna for application in a Hiper‐LAN is designed and fabricated. To obtain sufficient bandwidth when VSWR < 2, the T‐slot is inserted in the patch and a coaxial‐probe source is used. The measured result of the fabricated antenna is
## Abstract In this paper, an arrow‐shaped microstrip patch antenna is designed, fabricated, and measured for a 5‐GHz band wireless local area network (WLAN) application. The geometry of our proposed antenna is suitable for the wideband antenna in the 5‐GHz band. To obtain sufficient bandwidth in t
## Abstract In this paper, the characteristics of a modified meander‐type antenna for broadband impedance bandwidth are investigated in the 5‐GHz band. The design is based on a modified meander‐line width in a finite‐sized ground with coaxial SMA feeding. The modified meander‐type microstrip patch
In this paper, the characteristics of the square-spiral antenna for broadband impedance bandwidth are investigated in the 5-GHz band. The design is based on the 1.25-turn square spiral antenna in a finite-sized ground with coaxial SMA feeding. Likewise, the corner of the proposed antenna is truncate