𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Broadband omnidirectional U-shaped metal-plate monopole antenna

✍ Scribed by Saou-Wen Su; Kin-Lu Wong

Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
349 KB
Volume
44
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

former applied as a /4 matching line between two different impedances, and is also without etching in the ground plane. Two typical examples are introduced: matching between 50⍀ and 25⍀ and between 50⍀ and 12.5⍀. In both cases the reduction of the length of the proposed /4 line is 60% (or higher), compared to the conventional /4 matching line. For the realized example, the agreement obtained between the simulated and measured results is excellent. This similar /4 matching line can find applications for matching other impedance ratios.

📜 SIMILAR VOLUMES

Design of omnidirectional broadband meta
Design of omnidirectional broadband metal-plate monopole antennas
✍ D. Valderas; J. de No; J. Meléndez; I. Sancho 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 376 KB 👁 1 views

## Abstract This article provides a study of monopoles derived from planar configurations by repeated plate rotation. A comparison of four prototypes shows that an increasing number of plates broadens the H‐plane 100% pattern uniformity bandwidth. At the same time, a very broad impedance bandwidth

Low-profile broadband omnidirectional mo
Low-profile broadband omnidirectional monopole antenna
✍ Xu Liang; Michael Chia Yan Wah 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 232 KB 👁 1 views

Calculations ha¨e been made for rotationally symmetric monopole antennas with different shapes by the moment method. By comparing the VSWR, the gain, and the ¨olume of the antenna, an ideal configuration is obtained. Some useful references for the antenna design ha¨e been gi¨en. Theoretical and expe

A compact wideband omnidirectional cross
A compact wideband omnidirectional cross-plate monopole antenna
✍ Kin-Lu Wong; Chih-Hsien Wu; Fa-Shian Chang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 156 KB 👁 1 views

## Abstract A novel cross‐plate monopole antenna formed by two orthogonal step‐shaped metal plates is presented. The antenna occupies a compact cross‐sectional area and yet provides a wide operating bandwidth (lower‐to‐upper‐edge frequency ratio larger than 1:6) with omnidirectional or near‐omnidir

Broadband probe-fed L-shaped plate anten
Broadband probe-fed L-shaped plate antenna
✍ Zhi Ning Chen; Y. W. M. Chia 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 126 KB 👁 1 views

Figure 3 a Measured input impedance of the planar monopole Ž . for slant angle s 0Њ. b Measured input impedance of the planar Ž . monopole for slant angle s 45Њ. c Measured input impedance of the planar monopole for slant angle s 90Њ Figure 4 Measured input resistance R and resonance frequency ma x

Broadband E-shaped monopole antenna for
Broadband E-shaped monopole antenna for USB dongle application
✍ Jinwoo Jung; Hyeonjin Lee; Yeongseog Lim 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 230 KB 👁 1 views

## Abstract A broadband E‐shaped monopole antenna for universal serial bus (USB) dongle applications is demonstrated experimentally and numerically. According to the experimental results, the operating mode has an impedance bandwidth of approximately 39.8% (1.83–2.74 GHz) that covers the UMTS, WiBr

Broadband printed π-shaped monopole ante
Broadband printed π-shaped monopole antenna for WLAN operation
✍ Saou-Wen Su; Chih-Hsien Wu; Wen-Shyang Chen; Kin-Lu Wong 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 79 KB

## Abstract A broadband printed π‐shaped monopole antenna is presented. The antenna is easily achieved by adding two short vertical strips (one is a feeding strip and one is a short‐circuiting strip) to a long horizontal strip, forming into a π shape with a low profile. This antenna can generate a