𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design of omnidirectional broadband metal-plate monopole antennas

✍ Scribed by D. Valderas; J. de No; J. Meléndez; I. Sancho

Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
376 KB
Volume
49
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This article provides a study of monopoles derived from planar configurations by repeated plate rotation. A comparison of four prototypes shows that an increasing number of plates broadens the H‐plane 100% pattern uniformity bandwidth. At the same time, a very broad impedance bandwidth is achieved for all the configurations (1.2 to 50^+^ GHz VSWR < 2 typical). Thus, the design takes into account both omnidirectional and matching radiation at the same time. Pulse distortion is also discussed, along with VSWR, radiation patterns, gain stability, and uniformity values over the bandwidth. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 375–379, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22130

📜 SIMILAR VOLUMES

Broadband omnidirectional U-shaped metal
Broadband omnidirectional U-shaped metal-plate monopole antenna
✍ Saou-Wen Su; Kin-Lu Wong 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 349 KB 👁 1 views

former applied as a /4 matching line between two different impedances, and is also without etching in the ground plane. Two typical examples are introduced: matching between 50⍀ and 25⍀ and between 50⍀ and 12.5⍀. In both cases the reduction of the length of the proposed /4 line is 60% (or higher), c

Low-profile broadband omnidirectional mo
Low-profile broadband omnidirectional monopole antenna
✍ Xu Liang; Michael Chia Yan Wah 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 232 KB 👁 1 views

Calculations ha¨e been made for rotationally symmetric monopole antennas with different shapes by the moment method. By comparing the VSWR, the gain, and the ¨olume of the antenna, an ideal configuration is obtained. Some useful references for the antenna design ha¨e been gi¨en. Theoretical and expe

On the design of broadband omnidirection
On the design of broadband omnidirectional compact antennas
✍ J. R. Bergmann 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 115 KB 👁 1 views

## Abstract The conventional discone antenna is well known as an easy‐to‐build broadband antenna with a vertically polarized omnidirectional radiation pattern. Here, we consider an alternative configuration where both metallic surfaces involved in discone‐type antennas are shaped. A study is perfor

A compact wideband omnidirectional cross
A compact wideband omnidirectional cross-plate monopole antenna
✍ Kin-Lu Wong; Chih-Hsien Wu; Fa-Shian Chang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 156 KB 👁 1 views

## Abstract A novel cross‐plate monopole antenna formed by two orthogonal step‐shaped metal plates is presented. The antenna occupies a compact cross‐sectional area and yet provides a wide operating bandwidth (lower‐to‐upper‐edge frequency ratio larger than 1:6) with omnidirectional or near‐omnidir

Ultra-wideband metal-plate monopole ante
Ultra-wideband metal-plate monopole antenna for laptop application
✍ Kin-Lu Wong; Liang-Che Chou; Hong-Twu Chen 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 101 KB 👁 1 views

## Abstract This paper presents a study of an ultra‐wideband (UWB) metal‐plate monopole antenna applied to a laptop for wireless communications. The UWB antenna in this study is a metal‐plate monopole of an inverted‐L shape mounted at the top edge of the supporting metal frame for the laptop displa