𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A compact wideband omnidirectional cross-plate monopole antenna

✍ Scribed by Kin-Lu Wong; Chih-Hsien Wu; Fa-Shian Chang

Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
156 KB
Volume
44
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A novel cross‐plate monopole antenna formed by two orthogonal step‐shaped metal plates is presented. The antenna occupies a compact cross‐sectional area and yet provides a wide operating bandwidth (lower‐to‐upper‐edge frequency ratio larger than 1:6) with omnidirectional or near‐omnidirectional radiation patterns. Details of the proposed antenna are described, and a prototype is constructed and studied. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 44: 492–494, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20676

📜 SIMILAR VOLUMES

Wideband omnidirectional square-cylindri
Wideband omnidirectional square-cylindrical monopole antenna
✍ Yung-Tao Liu; Kin-Lu Wong; Chia-Lun Tang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 180 KB 👁 1 views

This paper presents a novel square-cylindrical monopole antenna fabricated using a single metal plate. A prototype of the proposed antenna with a cross-sectional area of 10 ϫ 10 mm 2 and a length of 30 mm is implemented, and the measured results indicate that the antenna can provide good omnidirecti

Compact wideband inverted planar monopol
Compact wideband inverted planar monopole antenna
✍ J. W. Baik; Y. J. Sung; Y.-S. Kim 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 160 KB

## Abstract In this article, an inverted planar monopole antenna with two shorting plates is proposed. This inverted planar monopole antenna provides a 3.55:1 impedance bandwidth (for VSWR < 2). Owing to its compact size and wide impedance bandwidth, this antenna is suitable for CDMA, GSM, DCS, PCS

Broadband omnidirectional U-shaped metal
Broadband omnidirectional U-shaped metal-plate monopole antenna
✍ Saou-Wen Su; Kin-Lu Wong 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 349 KB 👁 1 views

former applied as a /4 matching line between two different impedances, and is also without etching in the ground plane. Two typical examples are introduced: matching between 50⍀ and 25⍀ and between 50⍀ and 12.5⍀. In both cases the reduction of the length of the proposed /4 line is 60% (or higher), c

Design of omnidirectional broadband meta
Design of omnidirectional broadband metal-plate monopole antennas
✍ D. Valderas; J. de No; J. Meléndez; I. Sancho 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 376 KB 👁 1 views

## Abstract This article provides a study of monopoles derived from planar configurations by repeated plate rotation. A comparison of four prototypes shows that an increasing number of plates broadens the H‐plane 100% pattern uniformity bandwidth. At the same time, a very broad impedance bandwidth

Wideband omnidirectional L-shaped monopo
Wideband omnidirectional L-shaped monopole antenna for a wireless USB dongle
✍ Saou-Wen Su; Austin Chen; Yung-Tao Liu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

## Abstract A new omnidirectional monopole antenna well suited to application in a wireless universal serial bus dongle for wideband operation is presented. The antenna is an L‐shaped metal‐plate monopole antenna consisting of a rectangular monopole element and a matching portion. The antenna is su

A dual-band rejected cross monopole ante
A dual-band rejected cross monopole antenna maintaining omnidirection radiation
✍ Wen-Shan Chen; Chi-Huang Lin 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 303 KB 👁 1 views

## Abstract UWB cross semi‐elliptic monopole antenna with a dual‐band rejected characteristic is presented and experimentally studied. The proposed cross bevel‐rectangular monopole antenna is embedded with four small h‐shaped slots; it produces a design of dual‐band rejected characteristics and mai