The gas permeability of 0, and N, for homogeneous and composite membranes prepared from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) samples with different molecular weight parameters was investigated. Temperature dependencies of gas permeability coefficients and permselectivity were determined for
A further study of interpenetrating polymer networks of poly(2,6-dimethyl-1,4-phenylene oxide) and polybutadiene: Effect of higher molecular weight crosslinker
β Scribed by Yao-He Hua; Harry L. Frisch
- Publisher
- John Wiley and Sons
- Year
- 1990
- Tongue
- English
- Weight
- 116 KB
- Volume
- 40
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The inΓuence of polystyrene concentration in polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide) (PS/PDMPO) miscible polymer blends has been studied by the combined techniques of x-ray photoelectron spectroscopy (XPS) and time-of-Γight secondary ion mass spectrometry (ToF-SIMS). The O 1s/C 1s rat
## Abstract A series of anion exchange membranes with pyridinium groups were prepared by aminating 100% bromomethylated poly(2,6βdimethylβ1,4βphenylene oxide) with 4βvinylpyridine. These membranes exhibited higher ion exchange capacity, lower water uptake, lower area resistance, and better thermal
Thin film composite membranes were prepared by coating a thin layer of sulfonated poly ( 1,4dimethyl-2,6-phenylene oxide) polymer on the surface of a polysulfone ultrafiltration membrane. The membrane performance was studied when the sulfonate was either in the hydrogen form or loaded fully with an