✦ LIBER ✦

Effects of polymer molecular weight and chemical modification on the gas transport properties of poly(2,6-dimethyl-1,4-phenylene oxide)

✍ Scribed by Geeta Chowdhury; Ranka Vujosevic; Takeshi Matsuura; Brendan Laverty

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 104 KB
Volume: 77
Category: Article
ISSN: 0021-8995
DOI: 10.1002/1097-4628(20000801)77:5<1137::aid-app22>3.0.co;2-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of molecular weight parameters on

Effect of molecular weight parameters on gas transport properties of poly(2,6-dimethyl-1,4-phenylene oxide)

✍ G. A. Polotskaya; S. A. Agranova; N. V. Gazdina; Yu. P. Kuznetsov; V. V. Nestero 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 341 KB 👁 2 views

The gas permeability of 0, and N, for homogeneous and composite membranes prepared from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) samples with different molecular weight parameters was investigated. Temperature dependencies of gas permeability coefficients and permselectivity were determined for

Effect of chemical doping on the electri

Effect of chemical doping on the electrical conductivity of poly(2,6-dimethyl-1,4-phenylene oxide)

✍ A. K. Kalkar; Shankar Kundagol; Suresh Chand; Subhas Chandra 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 443 KB

The electrical conductivity of solution-grown poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) films doped with TCNQ, TCNE, TNF, and I, has been studied as a function of dopant concentration, temperature (298-353 K ) , and field (50-2000 V ) . PPO forms a conductive complex on doping with these strong

Synthesis and physical properties of low

Synthesis and physical properties of low-molecular-weight redistributed poly(2,6-dimethyl-1,4-phenylene oxide) for epoxy resin

✍ Hann-Jang Hwang; Su-Wen Hsu; Chun-Shan Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 162 KB

A further study of interpenetrating poly

A further study of interpenetrating polymer networks of poly(2,6-dimethyl-1,4-phenylene oxide) and polybutadiene: Effect of higher molecular weight crosslinker

✍ Yao-He Hua; Harry L. Frisch 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 116 KB

Effect of zinc diisopropyl dithiophospha

Effect of zinc diisopropyl dithiophosphate on the photooxidative degradation of poly(2,6-dimethyl-1,4-phenylene oxide) films

✍ R. Chandra; S. Singh; A. K. Verma; Subhash 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB 👁 1 views

Wear and friction in glassy polymers: Mi

Wear and friction in glassy polymers: Microscratch on blends of polystyrene and poly (2,6-dimethyl-1,4-phenylene oxide)

✍ Arnold C.-M. Yang; Tsai W. Wu 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 443 KB 👁 2 views

The microscopic process of abrasive wear and friction in glassy polymers was studied by using a special microscratch technique. A miscible blend of polystyrene (PS) and poly(phenylene oxide) (PPO) was used. It was found that as the composition varies there seems to exist two wear regimes in the blen