𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A fully monolithic 260-μW, 1-GHz subthreshold low noise amplifier

✍ Scribed by Perumana, B.G.; Chakraborty, S.; Chang-Ho Lee; Laskar, J.

Book ID
115473848
Publisher
IEEE
Year
2005
Tongue
English
Weight
495 KB
Volume
15
Category
Article
ISSN
1531-1309

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A 1.2-V fully integrated 2.4-GHz low-noi
A 1.2-V fully integrated 2.4-GHz low-noise amplifier in 0.35-μm CMOS technology
✍ C. C. Meng; M. H. Chiang; T. H. Wu 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 314 KB

## Abstract A 1.2‐V fully integrated 0.35‐μm inductively degenerated common source CMOS low‐noise amplifier has been demonstrated at 2.4 GHz in this paper. A simple common source configuration can be operated at lower voltage and has lower output impedance when compared with a conventional high out

A monolithic 1.57/5.25-GHz concurrent du
A monolithic 1.57/5.25-GHz concurrent dual-band low-noise amplifier using InGaP/GaAs HBT technology
✍ Shey-Shi Lu; Yo-Sheng Lin; Bo-Wei Lee 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 191 KB

## Abstract A monolithic concurrent dual‐band low‐noise amplifier (LNA) using InGaP/GaAs HBT technology is demonstrated for the first time. The LNA provides narrowband gain and matching simultaneously at both 1.57‐GHz (GPS) and 5.25‐GHz (ISM) bands. It consumes only 15‐mW power and achieves transdu

A 1-V, 6-mA, 3–6 GHz broadband 0.18-μm C
A 1-V, 6-mA, 3–6 GHz broadband 0.18-μm CMOS low-noise amplifier for UWB receiver
✍ C.-P. Chang; C.-C. Yen; H.-R. Chuang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 346 KB

## Abstract A 3–6 GHz broadband CMOS single‐ended LNA fabricated with the 0.18 μm 1P6M process for UWB and WLAN receiver is presented. Due to its noncascode circuit architecture, the proposed LNA can operate under 1V supply voltage and 6mA current consumption. In the UWB low band (3.1–5.15 GHz), th