A compact low noise operational amplifier for a 1.2 μm digital CMOS technology
✍ Scribed by Holman, W.T.; Connelly, J.A.
- Book ID
- 119774345
- Publisher
- IEEE
- Year
- 1995
- Tongue
- English
- Weight
- 530 KB
- Volume
- 30
- Category
- Article
- ISSN
- 0018-9200
- DOI
- 10.1109/4.387078
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A K‐band low‐noise amplifier (LNA) was realized in a standard 0.18‐μm CMOS technology. The cascaded common‐source configuration of four stages was adopted for low voltage operation and high gain performance. In addition, the gate‐source transformer feedback technique was employed to ach
## Abstract A 1.2‐V fully integrated 0.35‐μm inductively degenerated common source CMOS low‐noise amplifier has been demonstrated at 2.4 GHz in this paper. A simple common source configuration can be operated at lower voltage and has lower output impedance when compared with a conventional high out
## Abstract A Q‐band low‐noise amplifier (LNA) suitable for low‐voltage operation is presented in this paper.The amplifier uses a low‐voltage cascode structure in the first stage of the amplifier and was fabricated using a 0.13‐μm RF CMOS process with eight layers of copper metallization. Low‐volta
## Abstract A 20‐GHz CMOS low‐noise amplifier (LNA) fabricated with the 0.18 μm process is presented. This two‐stage cascaded common source LNA exhibits low power consumption with a satisfying performance such as overall gain and noise figure (NF). The measurement is performed on‐wafer. The 20‐GHz