Films were prepared by reaction of HEMA monomer with the crosslinking agent ethyleneglycol dimethacrylate (EGDMA) at crosslinking ratios, X, of 0.005, 0.01, 0.0128, 0.025, and 0.050 mol EGDMA/mol HEMA in the presence of 40 wt. % water at 60Β°C for 12 h. These membranes were subsequently swollen in wa
Wettability of hydrogels I. Poly(2-hydroxyethyl methacrylate)
β Scribed by Holly, Frank J. ;Refojo, Miguel F.
- Publisher
- John Wiley and Sons
- Year
- 1975
- Tongue
- English
- Weight
- 483 KB
- Volume
- 9
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
The wettability characteristics of the contact lens material, PHEMA, with respect to water have been determined by using the sessile drop, and the captive air bubble techniques of contact angle goniometry. It is concluded that on PHEMA gels water does not spread spontaneously. Large hysteresis has been observed in the advancing and receding contact angles. This suggests that this hydrogel surface is capable of changing its free energy through reorientation of the polymer side chains and chain segments depending on the nature of the adjacent phase. The water content of the gels does not appear to have an effect on water wettability in the hydration range investigated. The minor wettability differences among the various gels studied were most likely due to differences in surface structure and segmental mobility due to inherent variations in the method of preparation. Small but consistent differences were found between the contact angles measured by the captive bubble method and those obtained by the sessile drop method, the former values being higher. These differences may not be methodβrelated artifacts and cannot be explained at the present time.
π SIMILAR VOLUMES
## Abstract The transport of urea and other biologically interesting solutes in aqueous solution across poly(2βhydroxyethyl methacrylate) (pβHEMA) hydrogel membranes has been studied. The results show that pβHEMA membranes have a high permeability to urea due to a strong interaction between the pol
A complex mechanism characterizes the water uptake kinetics in hydrogels, as a consequence of the strong structural changes occurring in the material during the sorption process. The water sorption involves the transformation of a glassy, moderately crosslinked polymer in a rubbery material. In this
Pralidoxime chloride (PAM-Cl)-loaded poly(2-hydroxyethyl methacrylate) (PHEMA)-based hydrogels were prepared by bulk copolymerization of 2-hydroxyethyl methacrylate (HEMA) with different mol fractions (0.02-0.10) of trimethylsilyl methacrylate. Characterization of the gels was done by dynamic swelli
## Abstract Biodegradable supermacroporous PHEMA cryogels were produced by combining two crosslinkers, poly(ethylene glycol) diacrylate and a newly developed disulfide water soluble crosslinker, __N__,__N__β²βbis(methacryloyl)βLβcystine. The biodegradable PHEMA cryogels were prepared with gel fracti