An RF MEMs microelectromechanical system variable capacitor has been demonstrated with a 22:1 tuning range, tuning from 1.5 to 33.2 pF of capacitance. This capacitor was constructed using bistable MEMs membrane capacitors with individual tuning ranges of 70:1 to 100:1, control voltages in the 30-55
Tunable MEMS volume capacitors for high voltage applications
β Scribed by J.A. Etxeberria; F.J. Gracia
- Publisher
- Elsevier Science
- Year
- 2007
- Tongue
- English
- Weight
- 573 KB
- Volume
- 84
- Category
- Article
- ISSN
- 0167-9317
No coin nor oath required. For personal study only.
β¦ Synopsis
This paper reports the design, fabrication and electrical characterization of MEMS tunable volume capacitors to be used as voltage controlled devices in tuning telecommunication circuits. A novel fabrication process to obtain parallel plate metallic capacitors based on deep reactive ion etching (DRIE) bulk micromachining techniques have been developed. Devices of three different electrode areas have been fabricated and designed and the influence of the area in the main characteristics of the MEMS capacitors established. The interaction of the DC tuning voltage and AC signal and their influence on the tuning behavior has been analyzed and the top operation limits evaluated. The obtained results make this kind of MEMS tunable metallic capacitors appropriate candidates for its use in the new power MEMS scenario.
π SIMILAR VOLUMES
This paper describes the design and fabrication of a distributed MEMS ( ) transmission line DMTL , used to realize a transmission-line with a voltage-variable electrical length for microwave circuits. The DMTL is a coplanar waveguide periodically loaded with continuously-variable MEMS capacitors. A
## Abstract Simulation results for four MEMS variable capacitors suitable for fabrication using the LIGA process are presented. A __Q__βfactor as high as 435.6 was obtained using a copperβdevice layer. The capacitor with a nominal capacitance of 0.24 pF has a selfβresonant frequency of 33.7 GHz, ma
## Abstract The authors propose to use microelectromechanical systems (MEMS) to produce novel phase shifters based on an electronically reconfigurable highβimpedance surface (HIS). Typically, HIS is a textured metal surface with reactive impedance varying from an initial value to a very high value.