𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The study of electrochemical preparation of ferrate(VI) using alternating current superimposed on the direct current. Frequency dependence of current yields

✍ Scribed by K. Bouzek; I. Roušar

Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
353 KB
Volume
38
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

✦ Synopsis

The dependence of the current yield of the electrochemical production of ferrate(VI) by anodic oxidation of iron was measured as a function of the frequency of alternating current, superimposed on the direct current; the ratio of the ac amplitude to the dc current was 2.6: 1 and the electrolyte was NaOH solution of a concentration of 560gdme3 at 20 and 30°C. The highest current yield was found at an ac frequency of 5 Hz.

📜 SIMILAR VOLUMES

The effect of duty cycle and frequency o
The effect of duty cycle and frequency on muscle torque production using kilohertz frequency range alternating current
✍ Alex R Ward; Valma J Robertson; Harry Ioannou 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 536 KB

We investigated the frequency and duty cycle dependence of maximal electrically induced torque (MEIT) of the wrist extensors. Fifty hertz burst modulated sinusoidal alternating current (AC) in the frequency range 0.5-20 kHz was used, with duty cycles ranging from a minimum (one cycle) to maximum (co

A contribution to the study on electropo
A contribution to the study on electropolishing of mild steel and aluminium using alternating current
✍ J.E. Labarga; J.M. Bastidas; S. Feliu 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 235 KB

Abstrac-The use of alternating current for electropolishing of steel and aluminium is investigated. The effect of frequency and waveform on the current eikiency and on the surface roughness for two polishing electrolytes are studied. There exists a frequency range for which a maximum levelling actio

Alternating current scanning electrochem
Alternating current scanning electrochemical microscopy (AC-SECM) studies on the surface of electrochemically polished NiTi shape memory alloys
✍ S. Belger; A. Schulte; C. Hessing; M. Pohl; W. Schuhmann 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 125 KB 👁 1 views

## Abstract Aiming at imaging local differences in electrochemical activity and related corrosion effects, the surface of electropolished NiTi was investigated using alternating current scanning electrochemical microscopy (AC‐SECM). Segregation‐related spatial variations in the rates of the anodic

Studies on the vibrated dropping mercury
Studies on the vibrated dropping mercury electrode—effect of frequency and magnitude of the alternating field on the polarographic limiting current
✍ R. Narayan 📂 Article 📅 1962 🏛 Elsevier Science 🌐 English ⚖ 365 KB

A detailed study of the vibrated dropping mercury electrode has been made\_ Electrocapillaryphoresis is shown to be primarily responsible for the increased diffusion current due to the application of a transverse alternating field\_ A few typical results of the investigation of the effects of the ma

Analytical expressions for overvoltage d
Analytical expressions for overvoltage determination by the use of superimposed current pulses on constant Faradaic current. A useful expression for transient studies on O2/O3 evolving PbO2
✍ Jordanis Thanos 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 314 KB

In studies of the kinetics of oxygen and ozone, evolution by the electrolysis of water transient galvanostatic and impedance measurements were made. Under the existing high dc current densities, necessary to obtain substantial amounts of ozone, the treatments of the diffusion problems presented so f