𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The Mechanical Properties of Hydroxypropylmethylcellulose Films Derived from Aqueous Systems Part 1: The Influence of Plasticisers

✍ Scribed by Aulton, M. E.; Abdul-Razzak, M. H.; Hogan, J. E.

Book ID
120541373
Publisher
Informa plc
Year
1981
Tongue
English
Weight
656 KB
Volume
7
Category
Article
ISSN
0363-9045

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of slag content on the mic
The influence of slag content on the microstructure, permeability and mechanical properties of concrete Part 1 Microstructural studies and basic mechanical properties
✍ Tarja HΓ€kkinen πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 987 KB

The microstructural, permeability and basic mechanical properties of slag concretes made of neutral (CaO/Si02=l) and low alumina content (A1203=8.5%) slags were investigated. Alkali-activated slag concrete was studied by comparison with PC concrete and blended cement concrete. The reasons for the cr

Properties and mechanism of formation of
Properties and mechanism of formation of thick anodic oxide films on aluminium from the non-aqueous system boric-acid-formamide
✍ S. Tajima; N. Baba; T. Mori πŸ“‚ Article πŸ“… 1964 πŸ› Elsevier Science 🌐 English βš– 702 KB

Thick coloured oxide films are produced on aluminium by anodic oxidation in the non-aqueous system of boric-acid-formamide. The films are hard and compact and the colour tone changes from yellow, through brown, to black as the film becomes thicker. The properties and mechanism of formation of the f