𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The Effect of Sb Addition on Sn-Based Alloys for High-Temperature Lead-Free Solders: an Investigation of the Ag-Sb-Sn System

✍ Scribed by D. Li; S. Delsante; A. Watson; G. Borzone

Book ID
107457371
Publisher
Springer US
Year
2011
Tongue
English
Weight
575 KB
Volume
41
Category
Article
ISSN
0361-5235

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of Ag addition on the corrosion p
Effect of Ag addition on the corrosion properties of Sn-based solder alloys
✍ Q. V. Bui; N. D. Nam; B.-I. Noh; A. Kar; J.-G. Kim; S.-B. Jung πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 German βš– 194 KB πŸ‘ 1 views

## Abstract Corrosion properties of three different Sn‐Ag lead free solder alloys have been investigated in 0.3 wt% Na~2~SO~4~ solution as corrosive environment. As cast solder alloy was analyzed by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Volume fractions of the Ag~3~Sn in t

Effect of cooling rate on the room-tempe
Effect of cooling rate on the room-temperature indentation creep of cast lead-free Sn-Bi solder alloys
✍ Mahmudi, R. ;Geranmayeh, A. R. ;Mahmoodi, S. R. ;Khalatbari, A. πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 418 KB

## Abstract The influence of cooling rate on the creep behavior of cast Sn–(1–5)%Bi solder alloys was studied by indentation testing at room temperature. The alloys were prepared at two different cooling rates of 0.01 Ks^–1^ and 8 Ks^–1^. This affected the microstructure and thus, the creep behavio