Effect of Ag addition on the corrosion properties of Sn-based solder alloys
β Scribed by Q. V. Bui; N. D. Nam; B.-I. Noh; A. Kar; J.-G. Kim; S.-B. Jung
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- German
- Weight
- 194 KB
- Volume
- 61
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Corrosion properties of three different SnβAg lead free solder alloys have been investigated in 0.3 wt% Na~2~SO~4~ solution as corrosive environment. As cast solder alloy was analyzed by Xβray diffraction (XRD) and scanning electron microscopy (SEM). Volume fractions of the Ag~3~Sn in the solders were determined by image analysis technique. Pitting potential and corrosion potential for the alloys were determined by potentiodynamic tests. Electrochemical impedance spectroscopy (EIS) was carried out to measure the film and charge transfer resistance. Alloys with lower Ag content have been found as better corrosion resistance material.
π SIMILAR VOLUMES
## Abstract The SnβZn alloys have been considered as leadβfree solders. In this paper, the effect of 0.0, 0.5, 1.0, 1.5 and 2.0 wt.% Indium as ternary additions on melting temperature, structure, microhardness and microβcreep of the Snβ9Zn leadβfree solders were investigated. It is shown that the a
Investigations describing the galvanic corrosion effects when either the low-temperature isotropic &TI) or vapor-deposited forms of carbon are coupled to surgical-grade type 316L stainless steel or Ti-6Al-4V alloy have been presented.' Questions regarding the possibly deleterious effects of carbon c
A novel AZ91 Ce containing magnesium alloy characterized by excellent corrosion resistance is fabricated by adding rare earth Ce (cerium) in the form of a Mg-Ce master alloy. The metallographic investigation shows that Ce added to AZ91 can obviously decrease the size of b-Mg 17 Al 12 and forms Al 11