The diffusion of hydrogen in iron and ferritic steels
β Scribed by E.W. Johnson; M.L. Hill
- Publisher
- Elsevier Science
- Year
- 1955
- Weight
- 436 KB
- Volume
- 3
- Category
- Article
- ISSN
- 0001-6160
No coin nor oath required. For personal study only.
β¦ Synopsis
EDITOR 99
which was not rotated, showed an increase of only 4.4X10" cme3. At intermediate rotation rates, the depth of the skin at the crystal surface, which remained unchanged by annealing at 475"C, increased rapidly with decreasing rotation rates.
The cause of the above described changes in resistivity is not at present understood. It is evident that the effect is intimately associated with the crystal growing process, but whether it involves lattice defects or impurities or both must await further work.
π SIMILAR VOLUMES
Eventhough 9 -12% Cr steels are mechanically designed for power plant applications up to 650 C, their effective use is limited by the corrosion resistance at this temperature. Therefore, the present paper addresses the development of diffusion coatings on 9% Cr ferritic-martensitic steels. The diffi
BOOTH? and J. HEWITT: h new model of hydrogen dtision in iron and steel is proposed, based upon the assumption of an equilibrium between interstitial hydrogen and hydrogen present as a molecular gas in voids. The model accurately predicts the anomalous variation in the diffusion rate of hydrogen wit
Almtract--Plastic deformation of ferritic stainless steel alloy AL 29-4-2 has been found to severely decrease the diffusivity and permeation of hydrogen and to increase the solubility somewhat. These changes are compared to the effects of deformation on these quantities in austenitic alloys. The dif
The corrosion behaviour, toughness and weldability of duplex stainless steel can be improved by controlling the composition and austenite :ferrite ratio in the base metal and in the weld deposits. Addition of nitrogen is beneficial to ductility and restistance to pitting corrosion; the latter is als