✦ LIBER ✦

Study of a slit cut on a microstrip antenna and its applications

✍ Scribed by Xue-Xia Zhang; Fan Yang

Publisher: John Wiley and Sons
Year: 1998
Tongue: English
Weight: 148 KB
Volume: 18
Category: Article
ISSN: 0895-2477
DOI: 10.1002/(sici)1098-2760(199807)18:4<297::aid-mop14>3.0.co;2-1

No coin nor oath required. For personal study only.

✦ Synopsis

The slit cut on a microstrip antenna is studied in this paper, and a multiport series inductance network is established for analysis. Based on this study, two slit applications are proposed: to adjust the resonant frequency, and to make a small microstrip antenna. Experiments agree well with the theoretical analysis.

📜 SIMILAR VOLUMES

Characteristics of a two-layer microstri

Characteristics of a two-layer microstrip patch antenna for Bluetooth applications

✍ Lu Lu; Jacob Carl Coetzee 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 99 KB 👁 1 views

## Abstract A double‐layer rectangular patch microstrip antenna suitable for Bluetooth applications is investigated. The patch is etched on a separate substrate which is suspended above the ground plane and supported by an MCX connector. The air gap between the patch and the ground plane increases

Design of a circularly polarized rectang

Design of a circularly polarized rectangular microstrip antenna for GPS applications

✍ M. S. Nishamol; V. P. Sarin; D. Tony; C. K. Aanandan; P. Mohanan; Kesavath Vasud 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 426 KB

## Abstract A compact design of a single feed microstrip antenna for circular polarization (CP) is proposed and studied.CP is brought about by embedding a slot in a cross shaped patch. The structure enables an area reduction of 46% as compared to conventional rectangular microstrip antenna. The ant

A study on rectangular microstrip antenn

A study on rectangular microstrip antenna with group of slots for compact operation

✍ R. M. Vani; S. F. Farida; P. V. Hunagund 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 1 views

## Abstract The compact configuration of a microstrip antenna can be realized by embedding suitable slots on the radiating patch. In this paper, a typical configuration of slots is studied by putting group of vertical slots near radiating edge with inset feed and the experimental results are presen

Theoretical and experimental studies of

Theoretical and experimental studies of a microstrip antenna with two parasitic patches

✍ Tsien-Ming Au; Kin-Fai Tong; Kwai-Man Luk 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 235 KB 👁 3 views

The variations of the dimensions and locations of two stacked parasitic elements on the input impedance SWR bandwidth and radiation patterns of aperture-coupled rectangular microstrip antennas are analyzed. It is found that the SWR bandwidth can be improved by selecting appropriate sizes and locatio

A study of stick-slip motion and its inf

A study of stick-slip motion and its influence on the cutting process

✍ Jih-Hua Chin; Chun-Chien Chen 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 950 KB

A bioinspired microstrip antennas based

A bioinspired microstrip antennas based on the idea of a cockroach antenna

✍ Mahmoud N. Mahmoud; H. Elkamchouchi 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 596 KB

## Abstract Insects possess garden variety of traits, but for some who lack the ability of vision, their species would have been extinct long ago. Through ingenuity of creation, these species adapted to the environment by developing antennas where they can use the basic principles of wave propagati