𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design of a circularly polarized rectangular microstrip antenna for GPS applications

✍ Scribed by M. S. Nishamol; V. P. Sarin; D. Tony; C. K. Aanandan; P. Mohanan; Kesavath Vasudevan


Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
426 KB
Volume
53
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A compact design of a single feed microstrip antenna for circular polarization (CP) is proposed and studied.CP is brought about by embedding a slot in a cross shaped patch. The structure enables an area reduction of 46% as compared to conventional rectangular microstrip antenna. The antenna offers a 2:1 VSWR bandwidth from 1.53 to 1.61 GHz on a substrate of dielectric constant 4.4 and height 1.6 mm with a broadside radiation characteristic in the entire band. The 3 dB axial ratio bandwidth of the antenna is 5% with moderate gain that covers global positioning system (GPS) L1 band. Simulation and experimental results of the antenna are presented and discussed. Β© 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:468–470, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25706


πŸ“œ SIMILAR VOLUMES


Circularly polarized microstrip antenna
✍ Che-Wei Su; Kin-Lu Wong πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 124 KB

## Abstract An experimental study of the nearly square circularly polarized microstrip antenna with a rectangular ground plane is presented. Results indicate that circular polarization characteristics of the nearly square microstrip antenna are greatly affected by the different side lengths of the

Computer aided design algorithm for sing
✍ Feliciano Lumini; Lucio Cividanes; J. C. da S. Lacava πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 227 KB πŸ‘ 2 views

Based on a resonant cavity model, this work presents an effective computer ( ) ( ) aided design CAD algorithm to design singly fed circularly polarized CP rectangular microstrip patch antennas. The CAD algorithm allows precise prediction of the antenna performance. The analysis of radiation pattern,

Design and fabrication of the circularly
✍ Lee Hyeonjin; Jinwoo Jung; Lim Yeongseog πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 487 KB

## Abstract In this article, circularly polarized microstrip patch antenna with a 5.8 GHz frequency for the Industrial Scientific Medical is designed and fabricated. The proposed modified cross‐slots antenna composed four separate slots by removing the intersection of the cross‐slot in conventional

The design of broadband circularly polar
✍ Liang Jjian-Gang; Gao Xiang-Jun; Zhao Hai-Zhou πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 301 KB πŸ‘ 1 views

## Abstract Based on the conventional microstrip antenna, a broadband circularly polarized microstrip antenna fed by electromagnetism coupling is designed, which is composed of three substrates. The frequency band is broadened not only, but also the circular polarization axial ratio is effectively

A compact-sized microstrip antenna for G
✍ Hsi-Tseng Chou; Yi-Ling Chiu πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 171 KB

## Abstract A microstrip antenna structure is proposed for global positioning system (GPS) applications. This structure is intended to reduce the antenna size at low cost in order to fulfill the increasing needs of mobile devices with GPS functions. Thus, dielectric slabs with low relative permitti