## Abstract In this paper, microstrip‐line‐fed rectangular microstrip antenna with open‐end meandering slots in the ground plane for compact broadband operation is presented. The proposed design consists of a rectangular patch which is fed by a 50‐Ω center fed microstrip‐line feed. Three identical
A study on rectangular microstrip antenna with group of slots for compact operation
✍ Scribed by R. M. Vani; S. F. Farida; P. V. Hunagund
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 215 KB
- Volume
- 40
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The compact configuration of a microstrip antenna can be realized by embedding suitable slots on the radiating patch. In this paper, a typical configuration of slots is studied by putting group of vertical slots near radiating edge with inset feed and the experimental results are presented. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 40: 396–398, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11391
📜 SIMILAR VOLUMES
## Abstract Novel compact circular polarization (CP) designs of a single‐feed triangular microstrip antenna with a triangular slot or an inverted triangular slot are proposed and experimentally studied. For the design with a triangular slot, CP operation can easily be achieved by inserting a slit w
By embedding a pair of comb-shaped slots close to the nonradiating edges of a rectangular microstrip antenna, a no¨el dualfrequency operation of microstrip antennas using a single probe feed is proposed and experimentally studied. The two operating frequencies ha¨e the same polarization planes and s
## Abstract A large‐band rectangular‐shaped microstrip‐fed circular slot antenna is studied in this Letter. In this case, many design parameters of this antenna lead to good impedance matching in a wide frequency band. Although the use of a high‐relative‐permittivity (ε~r~ = 4.3) substrate usually