This work deals with the stabilization and control of a system which is composed of a disk rolling on a plane, a controlled slender rod that is pivoted through its center of mass about the disk's center and two overhead rotors with their axes fixed in the upper part of the rod (see Figures 1 and2).
Stabilization and control of the motion of a rolling disk by using two rotors fixed along its axis
โ Scribed by Y. Yavin
- Publisher
- Elsevier Science
- Year
- 1999
- Tongue
- English
- Weight
- 586 KB
- Volume
- 169
- Category
- Article
- ISSN
- 0045-7825
No coin nor oath required. For personal study only.
โฆ Synopsis
This work deals with the stabilization and control of a system which is composed of a disk rolling on a plane, a slender rod that is fixed along the disk's axis with its middle point fixed in the disk's center, and two identical rotors fixed in the rod equally spaced along both sides of the disk. Each of the rotors is rotating in a plane that is perpendicular to the plane of the disk. In addition, these planes are perpendicular to each other (see Fig. 1). A kind of an inverse control strategy is proposed under which the motion of the disk is stabilized and is able asymptotically to track any given smooth ground trajectory.
๐ SIMILAR VOLUMES
This work deals with the stabilization and guidance of a system which is composed of a disk rolling on a plane, a peddaling mechanism located at the center of the disk, an upright controlled slender rod that is pivoted through its center of mass about the disk's center and two overhead rotors with t
## This work deals with the stabilization and control of a system which is composed of a disk rolling on a plane, and a circular rotor plate fixed in the disk's plane. The disk's motion is controlled by the above-mentioned rotor, a "tillting moment" and a pedalling moment. It is shown here that by
This work deals with the modelling of the motion of a disk rolling without slipping on a regular curve in N3. The disk's motion is driven by a pedalling torque and by using two overhead rotors.