๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Solder pastes for microelectronics : Ronald P. Anjard, Sr. Microelectron. J. 15 (2), 53 (1984)

Book ID
103281083
Publisher
Elsevier Science
Year
1984
Tongue
English
Weight
116 KB
Volume
24
Category
Article
ISSN
0026-2714

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Solder pastes for microelectronics: Rona
Solder pastes for microelectronics: Ronald P Anjard, Sr. Microelectron. J. 15 (2), 53 (1984)
๐Ÿ“‚ Article ๐Ÿ“… 1987 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 102 KB

Reliability of ECL 100k devices using AI (4% wt Cu, 1% wt Si) double level metalisation, isoplanar technology with shallow, 0.25 #m, base-emitter junctions was evaluated by means of high current and high temperature stresses. Three failure modes connected with electromigration phenomena were found i

Solder pastes for microelectronics
Solder pastes for microelectronics
โœ Ronald P. Anjard Sr. ๐Ÿ“‚ Article ๐Ÿ“… 1984 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 923 KB

Solder paste can be effectively designed into complex automatic handlers and processorsparticularly for high volume applications, it can be reflowed using a wide variety of techniques. Solder paste lends itself to being used in selective areas and at times in the process where other techniques such

Quality solder paste systems for use in
Quality solder paste systems for use in microelectronic applications: Ronald P. Anjard, Sr. Solid St. Technol 183 (October 1983)
๐Ÿ“‚ Article ๐Ÿ“… 1986 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 93 KB

This capacitor is located just under the device, but not under the conductor I/O to avoid a parasitic capacitive coupling. With the coming of leadless and leaded full array chip carriers such as pin grid array, we applied the same concept with a capacitor inside the cap. The results with different c